Removing Dust From Scanner Optics - MAGINON FS 500 Instruction Manual

9

7. Removing dust from scanner optics

Open the Image Scan Tool program just as if you were going to scan in an image (see
page 14).
Do not insert either the slide feeder or the negative holder into the scanner. You will
now see in the Image Scan Tool preview window where any dust has gathered. Switch,
within the program, between the "Slide" and "Negative" settings to detect further dirt
or dust. You can now remove the dust using the cleaning brush.
In order to get a clear image each time, we strongly advise that you clean the original
image holders and the glass surface of the media bay regularly with the cleaning
brush (included) or a clean, dry cotton bud free of alcohol.