Panasonic BB-HNP15A Operating Instructions Manual page 48

Operating Instructions
Icon of Toolbar and Slide Window
Close the operation window.
Move the focus to the previous
camera. (Enable if there is a
previous camera and disable if
there is not a previous camera).
Move the focus to the next camera.
(Enable if there is a next camera
and disable if there is not a next
camera).
Displays the number of the current
page, and the total number of
pages. Move to a specific page by
entering the page number.
Start manual recording of the
selected camera.
Start manual motion detection
recording of the selected camera.
Start manual alarm recording
(alarm recording of all, alarm 1
/sensor, alarm 2) of the selected
camera.
Stop manual recording of the
selected camera.
Note
If you drag the toolbar right or left, icons displayed on the toolbar will be changed.
48
Display the previous page.
(Enable if there is a previous
page, disable if there is not
a previous page.)
Display the next page.
(Enable if there is a next
page, disable if there is not
a next page.)
Drag to right.
Display the single-monitoring
page.
Display the multi-monitoring
page.
Display the multi-playback
page.
Display the recorded images
page.
Display the settings page.
Select all displayed cameras.
(When you change pages,
the selected will be cleared.)
Clear the selection from all
cameras.
Change the display to full
screen mode.
Change the display to
window mode.
Display/Hide the camera
operation bar.
Take snapshots from the
focus camera.
Transmit audio to cameras
that support audio features
(see page 117).
Set the volume of the selected
camera (see page 83).
Operate remote access
(see page 105).
Reconnect to the server
(see page 110).