SoftBank 812SH s II Instruction page 216

4
Transfer starts and confirmation appears
C Press M 3 to cancel.
C
Press g to end.
5 Choose Yes and press b to save
C
To cancel transfer, choose No
Press b
C
For Data Folder files, select Phone or Memory Card
Press b
B Files are automatically saved to handset or Memory Card
depending on available memory.
H
^ Handset must be in Standby to receive files; this
Note
function is disabled even in Standby if Password Lock/
Keypad Lock is active or firmware update is in progress.
^ High-speed infrared transfer supports JPEG files only.
Send up to 1.8 MB per transfer to 812SH sⅡ.
All File Transfer
CSending
H
A
Main Menu Settings Connectivity (F)
1 Select Send All and press b
2
Choose Yes and press b
Offline Mode is set.
3 Enter Handset Code and press b
4
Select an item and press b
5
Prepare recipient device
A Press b A A
Choose Yes
A
A
Infrared
6 Enter Authorisation Code and press b
Transfer starts. When finished, Send All menu returns.
C
For Phone Book, choose Yes or No
CReceiving
H
A
Settings Connectivity (F)
Main Menu
On/Off
1 Choose On (3 min.) and press b
Infrared is activated and handset returns to Standby.
^ Acquire infrared transmission within three minutes.
2
When connection is requested, Calling not
available during operation, OK? appears
3 Choose Yes and press b
Offline Mode is set.
4 Enter Authorisation Code and press b
^ Enter the same Authorisation Code as sender's.
5
Transfer starts and confirmation appears
C Press M 3 to cancel.
C Press g to end.
6
Adding Files
1 Select As New Items and press b
When transfer completes, handset returns to Standby.
C Press M 3 to cancel.
C
Press g to end.
A Press b
A A
Infrared Switch
10
10-13