Equipment - Sharp LC-37GD6U Operation Manual

Using external equipment
You can use the INPUT 4 terminal when connecting an HOMl equipment.
HDMI equipment
HOMI cable
...........--1----..
(Commercially available)
Dynamic Standard/
Range
Out of standard
Select the signal amplitude
range. Normally, select
Standard.
Auto/RGB/YCbCr Select the signal type from
4:4:4/YCbCr 4:2:2 an HOMl terminal. Unless
the image quality looks
obviously poor, select Auto.
Auto/ITU601/ Select the internal color
ITU709 space conversion method
when an RGB signal is
in put. Normally, select
Auto.
Press Af'V f
~J~
to select the desired setting
and press ENTER.
Press AfT to select the desired item and
press ENTER.
Color
Matrix
Signal
Type
To watch an HOM! equipment image, select
"INPUT4" from HINPUT SOURCE" menu
using INPUT on the remote control unit or
on the Display. (See page 66.)
e
Refer to your external equipment operation manual for
the signal type.
Press MENU and the MENU screen displays.
Press
~f~
to select "Option".
Press AfT to select llHDMI Setup'l, and then
press ENTER.
Auto View Enable/Disable Set whether or not to use
VIE\JV MODE based on
signal recognition,
including an HOMI signal.
@-54