Advertisement
L2 Repair Document
3、
Packing Requirements
i.
Please pay attention to the following points when different models put into one box：
ii.
Stick up the same models with tapes
iii.
Mark the model, quantity and specification of custom label on tape
iv.
The packing box for PCBA should have marking sticker and well sealed by the tape
v.
with TCL logo
vi.
Finally put all the packing boxes into packing cases strong enough and post to HK.
Stick up the same models with tapes
The packing box for PCBA should have
marking sticker and well sealed by the tape
with TCL logo
Once the PCBA are damaged or cannot be repaired or delayed in custom because of unqualified
packing, the shipping side will take the responsibility.
If you have any question or problem, please feel free to contact us
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
By NCK Team
Mark the model, quantity and specification of
Put all the packing boxes into packing cases
one touch 992 Level 2 Repair Document
TCT
custom label on tape
strong enough and post to HK
Mobile Limited
Model
Quantity
Specification
Page
38/39
Advertisement
