Table of Contents
Advertisement
Setting and Changing of the
Setting (Halogen Mode, Fluores-
cent Mode, Outdoor Mode)
q Video Level Adjustment
[Picture Level: –50 - +50]
Convergence level of AUTO IRIS/AUTO GAIN UP/
AUTO ND (ELC) can be adjusted.
w Detecting Ratio Adjustment [Light PEAK/AVG:
P50 - A50]
The ratio of AUTO IRIS/AUTO GAIN UP/AUTO ND
(ELC) detected peak to average can be adjusted
within a predetermined range.
e Photometric Measurement Method Setting [Light
Area: All, Center, Top cut, BTM cut, R/L cut
A photometric measurement method can be select-
ed for AUTO IRIS/AUTO GAIN UP/AUTO ND (ELC).
All: All the screen area is measured.
Center: The screen is measured mainly in the cen-
ter area, about one-third of both the top and bot-
tom and one-third of both the right and left por-
tions of the screen are excluded from measure-
ment.
Top cut: About one-third of the top part of the
screen is excluded from measurement.
BTM cut: About one-third of the bottom portion of
the screen is excluded from measurement.
R/L cut: About one-third of both the right and left
portions of the screen are excluded from mea-
surement.
All
Center
r Auto ND (ELC) Setting [Auto ND (ELC): ON/OFF]
ON: The electronic shutter is controlled to automati-
cally adjust the luminance.
OFF: Luminance is not automatically adjusted by
the electronic shutter.
Notes
• ON is automatically selected when the electronic
shutter @1 on the submenu [Other Set] is set to
[Auto ND]. OFF is selected when other than [Auto
ND] is selected.
• ON is selected when the SHUTTER switch is set
to [ELC] in RCU (RCB) mode, and OFF is select-
ed when it is set to other than [ELC].
SHUTTER Switch
-32-
Top cut
BTM cut
R/L cut
PAINTING
AUTO/ATW
GAIN
R
B
ATW
TOTAL
A
PED
B
AUTO
PED
R
B
AWC
HOLD
ABC
SHUTTER
SCENE
IRIS
500
1000
1
2
100
USER
S/S
OFF
SET
3
ELC
MAN
AUTO
RCU (RCB)
Advertisement
Table of Contents
