Table of Contents
Advertisement
PAINTING
AUTO/ATW
GAIN
R
ATW
A
B
AUTO
PED
R
AWC
HOLD
ABC
SHUTTER
SCENE
500
1000
1
2
USER
100
S/S
3
OFF
ELC
SET
RCU (RCB)
$2 2-dimensional Lowpass Filter Setting [2D LPF:
OFF/LOW/HIGH]
The 2D lowpass filter that reduces moire and cross
color can be set.
$3 Horizontal Phase Adjustment [H Phase:
–206 - +49]
Horizontal phase can be adjusted when a genlock
signal is supplied.
$4 Subcarrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse adjustment of subcarrier phase can be
made when a genlock signal is supplied.
$5 Subcarrier Phase Fine Adjustment [SC Fine:
–511 - +511]
Fine adjustment of subcarrier phase can be made
when a genlock signal is supplied.
B
TOTAL
R/B Gain
PED
Control
B
R/B Pedestal
Control
IRIS
MAN
AUTO
$6 6 Color Bar Setup Setting [Color Bar Set:
0.0 IRE/7.5 IRE]
The setup level of color bar can be adjusted.
$7 Detail Level Setting [Detail: OFF/LOW/HIGH]
Contour correction quantity can be selected.
Detail settings made using the Horizontal/Vertical
Detail Level HIGH/LOW Setting $8 .
$8 Horizontal/Vertical Detail Level HIGH/LOW
Setting
[H Detail Level H: +1 - +63]
[V Detail Level H: +1 - +31]
[H Detail Level L: 0 - +62]
[V Detail Level L: 0 - +30]
Detail level can be set in horizontal (H) and vertical
(V) directions with the Detail Level Setting $7 at
HIGH or LOW.
Whichever the direction, H or V, the set level at
HIGH must be at least one position higher than that
at LOW.
$9 Detail Band Setting [Detail Band: 1 - 5]
A contour correction band can be set with the
Detail Level Setting $7 at HIGH or LOW. The higher
setting, the finer will be the detail.
-43-
Advertisement
Table of Contents
