Page 1
Technical specifications and operating instructions Impaq 400 2.1 DVD receiver/speaker set Teufel...
Page 2
If the Teufel product is sold on because we can accept the loudspeakers only IN privately, the warranty may be transferred to the THEIR ORIGINAL PACKAGING.
IP 400 DR player/receiver which may affect its operation. If this happens, leave the appli- ance switched off at room temperature for several hours and then check whether the ap- pliance starts properly. Teufel · Impaq 400...
Impaq 400: introduction Dear Lautsprecher Teufel customer, Thank you for selecting the Impaq 400 from Lautsprecher Teufel. Impaq 400 is a complete system for playing back sound and film tracks. The combined IP 400 DR receiver/player inludes a 2.1 amplifier with an FM/AM radio unit and a DVD drive that supports all common music standards on disc including audiophile DVD audio.
Before starting First, please check that the system is complete Check that you have all of the components of your Teufel Impaq 400 system. 3IP 400 DR DVD receiver Please note: Please keep the boxes for at least the eight-week return period,...
Set-up · Connection · Installing the IP 400 F/SW speakers Connecting the speakers Setting up the speakers The Impaq 400 can be used in rooms up to about 25 m as a full-quality DVD playback set or stereo system for listening to music.
Displaying digital images in JPEG format formats depends on the recording procedure used: Dolby Virtual Speaker technology With the Impaq 400 you can view JPEG images on DVD-R/+R; CD-RW; DVD+RW/-RW The IP 400 DR supports Dolby Virtual Speaker your television screen.
As soon as playback is started, the current track or Speaker format display film chapter and the elapsed time are displayed. nO DISC No disc has been inserted OPEn The disc drawer is open LOADInG The IP 400 DR player/receiver is loading disc information Teufel · Impaq 400...
Digital Out Video Out Audio Out Digital audio outputs SCART OUTPUT These can be used to connect the Impaq 400 DVD Use this output to make a SCART connection with player to a 5.1 receiver. your TV. HDMI output Audio inputs Use the HDMI cable to connect this output to Use these inputs to connect other signal sources.
AnGLE This button switches between various camera perspectives(if these are available on the DVD). *= The IP 21 RC is technically identical to the models IP 400 RC and IP 500 RC. Teufel · Impaq 400...
Page 12
SETUP PROG Use this button to open the on-screen menu. During DVD playback, this brings you to the track & chapter programme menu where you can programme individual tracks or chapters for selected playback. 12 Teufel · Impaq 400...
DR to the inputs on a (optical or coaxial) to Impaq 400. two-channel amplifier. the digital input of an audio system. This al- lows you to use the IP 400 DR as a conven- tional DVD player with 5.1 sound output. Teufel · Impaq 400...
1080i. to the audio outputs your television. on your television. Also connect the stereo outputs LT and RT on the IP 400 DR to the audio outputs on your television. 14 Teufel · Impaq 400...
(PC, DVD, etc.) and audio sources (TV, projector, etc.). The content is encrypted at the transmitter in order to prevent unauthorised copies. Your television must support HDCP, otherwise you will only see interference on the screen. Teufel · Impaq 400...
But in all cases ensure that sound playback is switched off on the TV in order to prevent it negatively influenc- ing sound playback from the amplifier. 16 Teufel · Impaq 400...
∫ For each press of the button playback jumps forward one frame. ∫ No sound is played during frame-advance play- back. ∫ Press PLAY to resume normal playback. ∫ Frame-advance playback is only possible in a forwards direction. Teufel · Impaq 400...
∫ If you are playing a VCD, SACD or CD, it jumps back to the start of the track; another press of the button brings you to the start of the previ- ous track. 18 Teufel · Impaq 400...
4. Press MARK to hide the display indicator. The zoom function ZOOM During playback you can enlarge the image in three stages by repeatedly pressing the ZOOM button. The corresponding zoom level is displayed on the screen. Teufel · Impaq 400...
2. Mark the desired track with a tick using the OK button. 3. The selection is added to the programme list using the ADD screen entry. In this way, you can also add certain tracks to the programme list several times. 20 Teufel · Impaq 400...
During VCD playback this button has no function if the centre, surround and subwoofer are set to none in the audio set-up. When playing an audio CD, the following sound op- tions are available: ∫ Stereo ∫ Left ∫ Right ∫ Mixing Teufel · Impaq 400...
Press TREBLE and then adjust the value with the ∫ LINEAR ROCK, POP, CLASSIC and JAZZ. The se- VOL +/– buttons. lected mode is shown on the screen. ∫ You need to select STEREO mode to be able to use this function. 22 Teufel · Impaq 400...
COAXIAL IN and OPTICAL IN inputs. To leave the AUX IN mode: ∫ Press the DVD button to return to DVD mode. ∫ Press the USB button to return to USB mode. Teufel · Impaq 400...
STOP. High definition JPEG playback In order to activate HD-JPEG mode, press the SETUP button on the IP 21 RC remote control dur- ing JPEG playback (SETUP ≥ Video ≥ HD JPEG mode). 24 Teufel · Impaq 400...
English Black value Factory settings German AV priority Sharpness DVD audio DVD video HD format DivX Registration Auto 480p/576p 720p 1080i 1024 x 768 1360 x 768 HD JPEG mode Video output Component Progr. scan HDMI Teufel · Impaq 400...
You make the age categories/access restriction settings here. System You can reset the IP 400 DR to its factory set- tings here. Language Use this menu to set the default language for the menu, subtitles and film. 26 Teufel · Impaq 400...
Off: In this setting no digital signal is produced. PCM: This setting delivers a two-channel PCM data flow with 48 kHz audio. Select PCM to use the analogue audio outputs. BITSTREAM: This setting delivers a multichannel data flow to your 5.1 amplifier. Teufel · Impaq 400...
DivX video-on-demand content. The DivX-Player is available for download under www.divx.com. For a detailed registration procedure please refer to the DivX-Players manual or online help. However, this registration is NOT necessary to play DivX videofiles without DRM-protection. 28 Teufel · Impaq 400...
∫ Select the BITSTREAM setting menu on the IP 400 DR player/receiver. To do ∫ Press the SETUP key again this, read the section “SETUP menu” in these operating instructions. ∫ Select the screen format from the VIDEO menu. Teufel · Impaq 400...
Page 30
Due to the wide variety of USB sticks on the market, it is not possible to guarantee 100% compatibility with all sticks. We have had the best test results with the latest USB memory sticks(using the USB 2 standard). 30 Teufel · Impaq 400...
400 is officially DivX licensed and plays all versions of DivX Video(including DivX 6). HDMI(High Definition Multimedia Interface) is an in- terface for the digital transmission of audio and video data. It is used primarily for HD-compatible televisions and the corresponding playback devices. Teufel · Impaq 400...
Page 32
Technical description and operating instructions for Impaq 400 Teufel Please contact our service department if you have any questions, suggestions or if there is anything you think we could do better. All information is provided without gua- rantee of correctness. Subject to techni- Lautsprecher Teufel GmbH Tel.: +49(30) 30 09 30 0...
Need help?
Do you have a question about the Impaq 400 and is the answer not in the manual?
Questions and answers