Table of Contents
Advertisement
Disassembly
32
6.
Remove the flex from the chassis
7.
Left the keypad PC board away from the phone.
8.
To replace, align the flex connector the keypad PC board and gently press the
connector until properly seated in the connector socket.
9.
Thread the coaxial cable around the cable guide and seat the connector onto
its socket on the keypad PC board.
10. Insert and tighten the 2 T3 screws.
11. Paste on the silver chassis seal
12. Reassemble the front housing, transceiver PC board, transceiver PC board
shield, antenna cap, SIM, battery and battery cover as described in the
procedures.
September 23, 2005
Motorola SLVR L7
6809495A77-O
Advertisement
Table of Contents
Troubleshooting
