1.28 Mower Maintenance - Engine; Throttle Cable Adjustment; Carburettor Adjustments - Ranger 436D Owner's Handbook Manual

MOWER MAINTENANCE
Engine
2
1
6

Throttle Cable Adjustment

1.22
To prevent accidents stop the engine disconnect the spark plug
lead before attempting to carry out maintenance procedures on
the mower.
3
4
5
Loosen the outer cable clamp screw (1) and move the governor control
lever (2) to the left as far back as possible. Move the throttle control
lever to the 'fast' position and re-tighten the outer cable clamp screw
while pulling on the outter cable.

Carburettor Adjustments

Should only be made by an authorised Briggs & Stratton dealer. Under
no circumstances should the engine be adjusted to run at a speed in
excess of that shown on the Declaration of Conformity.
1. Air Filter
2. Fuel Cap
3. Start Grip
4. Oil Cap / Dipstick
5. Exhaust Guard
6. Spark Plug / Lead