Setup Menu - Panasonic TU-PTA100E Operating Instructions Manual

The Setup menu provides access to various advanced features and also to the Tuning
menu
Open the Setup menu
Move to your choice
Increase or decrease levels, set
options or access further menus
Press the TV/AV button to exit the

Setup menu

AV2 out
Teletext
Off timer
Q-Link
OSD Language
14
SETUP MENU
AV2 offers you a choice of signals to
send to the AV2 SCART socket. You
can choose from the current TV
programme position, the signal
entering AV1/AV3/AV4 or Monitor -
the picture displayed on screen.
The Teletext option allows you to
choose between FLOF/TOP or LIST
mode. See page 26.
Off timer will switch the receiver off
within a present time which you can
choose from between 0 to 90 minutes
in 15 minute intervals.
Note:
This function will not turn off the
power for the Wide Plasma Display. If
you would like to use the off timer for
the Wide Plasma Display, use the
Wide Plasma Display's own off timer
function.
Q-Link allows you to enable or disable
data communication when a VCR
compatible with Q-Link,
NEXTVIEWLINK
or similar technology is connected.
See page 24.
The Tunging menu provides an entry
to many other features including
Programme edit and Auto setup.
See page 15.
OSD Language allows you to select
the language used for On Screen
Displays.
See page 22.
Setup menu
AV2 out TV
Teletext TOP
Off timer Off
Q-Link On
Tuning menu Access
OSD language Access
Setup menu
AV2 out TV
Teletext TOP
Off timer Off
Q-Link On
Tuning menu Access
OSD language Access
Setup menu
AV2 out TV
Teletext TOP
Off timer Off
Q-Link Off
Tuning menu Access
OSD language Access
Select
Change
TV/AV Exit
Select
Change
TV/AV Exit
Select
Change
TV/AV Exit