Usage
Connecting External Devices
1.
Connect the external device to the elite Panaboard using a USB cable (sold separately).
•
elite Panaboard: Plug the A connector (larger connector) into the elite Panaboard's USB port.
External device: Plug the B connector (smaller connector) into a USB port on the external device.
To USB Port
About the Usage Location
•
Do not place the elite Panaboard where it is directly exposed to sunlight, near a stove, near to a heating/
cooling vent or exposed to strong winds.
•
Do not use the elite Panaboard in a location less than 10 °C (50 °F) or in a location subject to extreme
changes in temperature.
Note
•
The elite Panaboard may not work properly when used in one of the above locations.
20
Operating Instructions (For Basic Operations)
USB Cable
(Sold Separately)
MFP
Flatbed
Scanner
To USB Port