Yamaha FWX120 User Manual page 46

3  Specifying your provider information
1
Select a connection interface.
Select a connection interface.
If a USB data communication terminal is inserted in the specified USB port, the
interface is determined automatically.
If not, connect a USB data communication terminal and then try again.
2
Enter the configuration name.
Enter a descriptive destination name. It is a good idea to name the configuration so
that you can easily identify it when it needs to be modified.
3
Enter the access point name.
Enter the access point name provided by your carrier or provider. Entries may vary
depending on your contract plan. Be sure to check the relevant document when
entering it.
4
Enter the CID (Context Identifier).
Enter the CID number provided by your carrier or provider. Entries may vary depending
on your contract plan. Be sure to check the relevant document when entering it.
5
Enter the user ID.
If you need to specify a user ID, enter the user ID provided by your provider. Be sure
to check the relevant document when entering it.
46 | FWX120 User's Manual
1
Select
2
Fill in
3
Fill in
4
Fill in
5
Fill in
6
Fill in
7
Select
8
Click