Table of Contents
Advertisement
Name and function of individual parts
Front panel/Top panel
a DOWNLOAD button
If the product was set to permit revision updates
via the DOWNLOAD button the firmware can be
updated merely by pressing and holding down the
button for three seconds. Please refer to "Operation
Manual" (included in the attached CD-ROM) for
more details.
b Lamps
The lamps indicate the operating status of the
product. Please refer to "Operation Manual"
(included in the attached CD-ROM) for the
relationship between the lamp light and the status
of the product.
• POWER: Indicates the current power status of
the product.
• STATUS: Indicates the status of communication
with connected equipment.
• LAN1: Indicates the usage status of the LAN1
port.
• LAN2: Indicates the usage status of the LAN2
port.
14 | FWX120 User's Manual
c microSD lamp, button, slot
Commercially available microSD cards can be used
to copy the configuration file, save the log file, and
update the firmware.
Before ejecting the microSD card, ensure to first
cancel the connection by pressing and holding
down the microSD button for two seconds.
NOTE
When removing the inserted microSD card and
then inserting it again, please ensure that it has
first been completely ejected.
d USB lamp, button, port
Connecting a commercially available USB memory
stick enables the configuration file to be copied, the
log to be saved, and the firmware to be updated.
In addition, communication can also take place via
use of a 3G/LTE mobile phone line by connecting
a USB connection communication terminal.
Please refer to "Operation Manual" (included in
the attached CD-ROM) for more details.
Before removing any USB devices please be sure
to cancel the connection by pressing and holding
down the USB button for two seconds.
NOTE
Do not connect a USB device other than a USB
memory stick and a USB data communication
terminal. Failure to observe this could damage
the product.
e Ventilator
This is a hole to release the internal heat.
Advertisement
Table of Contents
