Detailed Setup - Panasonic PT-LB75NTU Operating Instructions Manual

DETAILED SETUP

You can perform more detailed image adjustment
manually.
For S-VIDEO/VIDEO signals
TV-SYSTEM
When the video signal is changed, the setting
switches automatically. You can switch the setting
manually to match the video data. Press I H to
cycle through the options.
AUTO
NTSC
NTSC 4.43
PAL
NOTE:
•• AUTO setting will select from NTSC/NTSC 4.43/PAL/
PAL60/PAL-M/PAL-N/SECAM.
STILL MODE
You can reduce the vertical flicker when projecting
a still image.
NOTE:
•• Set to OFF when projecting a moving image.
NOISE REDUCTION
You can switch the automatic noise reduction
system on/off. Press I H to select the required
setting.
SECAM
NOTE:
•• Applying noise reduction may affect the image quality.
PAL-N
For RGB signals
PAL-M
You can adjust the white balance more properly in
3 colors temperature by pressing I H.
PICTURE menu
OFF: Deactive
ON: Active
OFF: No noise reduction
ON: Automatic noise reduction
WHITE BALANCE RED
WHITE BALANCE GREEN
WHITE BALANCE BLUE
E
NGLISH - 31