Request Regarding Security; What You Can - Panasonic PT-LB1E Operating Instructions Manual

Request Regarding Security

When using this product, security breaches of the type described below are conceivable.
•
Leakage of your private information via this product
•
Illegal operation of this product by a malicious third-party
•
Harm to or cessation of operation of this product by a malicious third-party
Be sure to implement sufficient security measures.
•
Set passwords, and limit the users that are permitted login access.
•
Make sure the password is as hard to guess as possible.
•
Change the password periodically.
•
Panasonic Corporation and its affiliated companies never directly ask customers for their password.
Do not give out your password even if directly asked by a third-party representing themselves as Panasonic Corporation.
•
Always use on a network that has safety protection such as a firewall implemented.
What you can do
<WEB control> (See page 9)
The following operations are possible when using WebBrowser.
•
Setting and adjusting the projector
•
Displaying the projector status
•
Setting for message transmission
<PJLink> (See page 17)
Compatible with PJLink Class 1. The following operations can be performed from a computer when PJLink protocol is used.
•
Setting the projector
•
Querying the projector status
<Command control> (Refer to "SERIAL TERMINAL" in "Technical Information" of the Basic Manual.)
You can control the projector from a computer, using the control commands of the serial terminals.
If you use "WEB control", "PJLink" or "Command control", turn [ON] the [NETWORK CONTROL] in the NETWORK menu for the
projector. (See page 7)
3