Table of Contents
Advertisement
Adjusting the position of the projected picture
The vertical position of the projected picture can be adjusted by changing the height of the projection lens using
the LENS SHIFT dial which is on top of the projector.
After determining the projection distance and the setting-up position, adjust the vertical position of the projected
picture by carrying out the following procedure.
Press the LENS SHIFT dial on top of the projector.
If the LENS SHIFT dial is turned clockwise, the position of the projected image will be raised.
If the LENS SHIFT dial is turned counterclockwise, the position of the projected image will be lowered.
Press the LENS SHIFT dial on top of the projector.
NOTE:
The height of the projection lens can be adjusted within a range of
adjustment range for the position of the projected picture will vary depending on the size of the projected picture.
The dial will pop up and it will be possible to turn it to
make adjustments.
LENS SHIFT dial
The dial will pop back in again and adjustment will no
longer be possible.
Lens adjustment dial
-14-
LENS SHIFT dial
Solid line: Original picture position
Dotted line: Picture position after adjustment
LENS SHIFT dial
inch (±10.1 mm). However, the
Advertisement
Table of Contents
