Replacing The Oven Light Bulb; After-Sales Service; E Number And Fd Number; Energy And Environment Tips - Siemens HB933R51 Instruction Manual

Replacing the oven light bulb

If the bulb in the oven light fails, it must be replaced.
Replacement heat-resistant bulbs can be obtained from the
after-sales service or from specialist retailers. Please supply
your appliance's E number and FD number. Do not use any
other type of bulb.
Switch off the appliance at the circuit breaker or pull out the
1.
mains plug.
Open the appliance door.
2.
Lay a tea towel in the cold cooking compartment to prevent
3.
damage.
Unscrew the glass cover from the defective oven light bulb
4.
inside the cooking compartment by turning it anti-clockwise.

After-sales service

Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.

E number and FD number

When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate containing these numbers
can be found on the right-hand side of the oven door. To save
time, you can make a note of the number of your appliance and
the telephone number of the after-sales service in the space
below, should it be required.
E no.
After-sales service O

Energy and environment tips

Here you can find tips on how to save energy when baking and
roasting and how to dispose of your appliance properly.

Saving energy

Only preheat the oven when it is specified in the recipe that
■
you should do so.
Use dark, black lacquered or enamelled baking tins. They
■
absorb the heat particularly well.
Open the oven door as infrequently as possible while you are
■
cooking, baking or roasting.
It is best to bake several cakes one after the other. The oven
■
is still warm. This reduces the baking time for the second
cake. You can also place two loaf tins next to each other.
For longer cooking times, you can switch the oven off
■
10 minutes before the end of the cooking time and use the
residual heat to finish cooking.
22
FD no.
Replace the oven light bulb with one of the same type.
5.
Voltage: 240 V;
Power: 25 W;
Thread: E14;
Temperature resistance: 300 °C
Screw the glass cover of the oven light bulb back on.
6.
Remove the tea towel and switch the circuit breaker back on
7.
or plug in the mains plug.
Press the function button for the oven lighting until it locks into
place in order to check whether the oven lighting is working
properly.
Please note that there will be a fee for a visit by a service
technician in the event of a malfunction, even during the
warranty period.
You can find the contact information for your nearest after-sales
service in all countries here or in the attached after-sales
service directory.
Repair order and advice if faults occur
0810 240 260
A
01801 22 33 66
D
(€0.039/min. from a landline,
max. €0.42/min. from a mobile phone)
0848 840 040
CH
Put your trust in the expertise of the manufacturer. You can then
be sure that the repair work is carried out by trained service
technicians who can supply original spare parts for your
household appliance.

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly manner.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning used
electrical and electronic appliances (waste electrical
and electronic equipment - WEEE). The guideline
determines the framework for the return and recycling
of used appliances as applicable throughout the EU.