Sound Bar Basic Operation; Streaming Box Connection - RCA rts736w User Manual

1. Press STANDBY/ON button to turn on the
Sound Bar.
2. The four LED on the top of the unit will flash
for a while, please wait for the flashing to stop
while the unit is warming up, then NETWORK
LED will illuminate.
3. Press SOURCE to select input source,
NETWORK, AUX 1, AUX 2 or LINE IN can be
selected one by one. The LEDs located on
top of Sound Bar will indicate the currently-
selected source.
4. To adjust volume level:
• Press VOLUME
Bar or / buttons on the remote control
to adjust volume level.
To adjust bass or treble level:
• Press BASS or TREBLE button on the
remote control, the LED level indicators
will show the current bass or treble level,
then press /
control to adjust your desired level while
the LED Level indicator is flashing.
ConneCT To a TV
a. using a hdmi CaBle (foR BesT ConneCTion)
Connect a HDMI cable (not included) to the HDMI OUT jack on your player and to the HDMI IN jack on
your TV.
Notes:
• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and
the connector are matched.
• When using non-HDCP compatible TV, the image will not display properly.
• An HDMI cable carries both video and audio signals. If you want to use TV speakers, you do not need to
make an additional audio connection if you are using an HDMI cable.

sound Bar Basic operation

buttons on the Sound
buttons on the remote

streaming Box Connection

HDMI OUT
AUX 2 AUX 1
VOLUME, BASS and TREBLE Level Indicators
MAX
MIN
VIDEO OUT
High
Definition
TV
HDMI IN