Sony CDP-M305 Service Manual page 5

2) point the Infrared control at the IR receiver on the network
camera. 3) Open APP 2cu>toolbox> Infrared control，then you
can see the up/down/left/right button. Press any one button ,if
the network camera can move around , means the Infrared
control works well . 4) Then press WIFI button on the same
screen, to select the WIFI device to be connected. Input the
WIFI password and Device password(the factory default
password is empty ). 5) Then press " SET ", if you can hear one
alert tone "ding" , means the network has connected with WIFI
successful .and then the network indicator will stay-on
5.
Add Device
（1）it can search all device in the same LAN and set the
visiting password
Open the APP 2cu toolbox , press " shake "，shake your mobile
left/right , then the APP will search the devices in the local area
SMART SECURITY SYSTEM