Specifications - Panasonic PT-DZ6710 Specification Sheet

S F
P E C I L
DLP ™ Projectors

Specifications

Main Unit
Power supply: North America:
Europe:
Power consumption: North America:
Europe:
DLP™ chip: Panel size:
Display method:
Pixels:
Lens: PT-DZ6710:
PT-DZ6710L:
Lamp:
Screen size:
Brightness* 2 :
Center-to-corner uniformity*
Contrast* 2 :
Resolution:
Scanning frequency: RGB/DVI-D:
YP
S-Video/Video:
Optical axis shift:
Keystone correction range:
Installation:
Terminals * 3 : SDI IN:
DVI-D IN:
As of February 2009
E
120 V AC, 50/60 Hz
220–240 V AC, 50/60 Hz
820 W (880 VA) (Standby mode eco*
8 W. Both with fan stopped.)
800 W (960 VA) (Standby mode eco*
9 W. Both with fan stopped.)
0.67˝ diagonal (16:10 aspect ratio)
DLP™ chip x 1, DLP™ system
2,304,000 (1,920 x 1,200) x 1, total of 2,304,000 pixels
Powered zoom/focus lenses (1.8 – 2.4:1), F 1.7– 2.0, f 26.8 – 35.7 mm
Optional poweredzoom/focus lenses
300 W UHM lamps (x 2) (dual lamp system)
50 – 600 inches (50– 200 inches with the ET-DLE055), 16:10 aspect ratio
6,000 lumens (dual lamp, high power mode)
2 : 90%
2,000:1 (full on/full off, contrast mode: high, brightness: 3,000 lumens)
1,000:1 (full on/full off, contrast mode: normal)
1,920 x 1,200 pixels
Horizontal: 15–91 kHz, Vertical: 50– 85 Hz,
Dot clock: 162 MHz or lower
P (YC C ): 525i (480i): f
B R B R
625i (576i): f
525p (480p): f
625p (576p): f
750 (720)/60p: f
750 (720)/50p: f
1035/60i: f
1125 (1080)/60i: f
1125 (1080)/50i: f
1080/25p: f
1080/24p: f
1080/24sF: f
1080/30p: f
1080/60p: f
1080/50p: f
Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz,
(NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
Vertical: +50% (powered), horizontal: ±10% (powered)
Vertical: ±40°(±30° with the ET-DLE055).
Ceiling/floor, front/rear
BNC x 1,
DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link
only
PT-DZ6710/DZ6710L
15.75 kHz; f 60 Hz,
H V
15.63 kHz; f 50 Hz,
H V
31.50 kHz; f 60 Hz,
H V
31.25 kHz; f 50 Hz,
H V
45.00 kHz; f
H V
37.50 kHz; f
H V
33.75 kHz; f 60 Hz,
H V
33.75 kHz; f
H
28.13 kHz; f
H
28.13 kHz; f 25 Hz,
H V
27.00 kHz; f 24 Hz
H V
27.00 kHz; f 48 Hz,
H V
33.75 kHz; f 30 Hz
H V
67.50 kHz; f 60 Hz,
H V
56.25 kHz; f 50 Hz
H V
When using only the KEYSTONE correction of the Geometric
Adjustment function: Vertical ±40°, horizontal ±15° (vertical
±30° and horizontal ±15° with the ET-DLE055).
When using both the KEYSTONE and CURVED corrections of the
Geometric Adjustment function: Vertical ±5°, horizontal ±5°
(vertical ±10° and horizontal ±10° with the ET-DLE350, and ver-
tical ±10° and horizontal ±5° with the ET-DLE450).
SD-SDI signal (YC C 4:2:2 10-bit):
B R
SMPTE 259M compliant: 480i, 576i
Single-link HD-SDI signal (YC
SMPTE 292M compliant: 720/50p, 720/60p, 1035/60i, 1080/50i,
1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480) – WUXGA*
interlaced signals only, dot clock: 25–162 MHz
1 : 0.2 W, Standby mode normal:
1 : 0.3 W, Standby mode normal:
60 Hz,
50 Hz,
60 Hz,
V
50 Hz,
V
C 4:2:2 10-bit):
B R
4 (1,920 x 1,200), compatible with non-
< 2 >