Safety Restraints; To Install The Rear Cushion; Personal Safety System - Mercury mariner 2009 Owner's Manual

Seating and Safety Restraints

To install the rear cushion

1. Push the cushion to the inboard
side of the vehicle.
2. Make sure that the hinges are
locked into place.

SAFETY RESTRAINTS

Personal Safety System

The Personal Safety System provides an improved overall level of
frontal crash protection to front seat occupants and is designed to help
further reduce the risk of airbag-related injuries. The system is able to
analyze different occupant conditions and crash severity before activating
the appropriate safety devices to help better protect a range of
occupants in a variety of frontal crash situations.
Your vehicle's Personal Safety System consists of:
• Driver and passenger dual-stage airbag supplemental restraints.
• Front safety belts with pretensioners, energy management retractors,
and safety belt usage sensors.
• Driver's seat position sensor
• Front passenger sensing system
• "Passenger airbag off" or "pass airbag off" indicator lamp
• Front crash severity sensor.
• Restraints Control Module (RCM) with impact and safing sensors.
• Restraint system warning light and back-up tone.
• The electrical wiring for the airbags, crash sensor(s), safety belt
pretensioners, front safety belt usage sensors, driver seat position
sensor, front passenger sensing system, and indicator lights.
112
2009 Mariner (mrn)
Owners Guide, 1st Printing
USA (fus)