Table of Contents
Advertisement
Adjusting the picture
Switching the picture mode
The user can switch to the desired picture mode suitable for the image source and the environment in which this
projector is used.
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
PICTURE
PICTURE MODE
COLOUR
TINT
COLOUR TEMP.
GAMMA
CONTRAST
BRIGHT
SHARPNESS
NOISE REDUCTION
AI CONTROL
:MENU SELECT
:CHANGE
PICTURE MODE
Switching the AI control
By setting the AI control to "ON", the picture is automatically adjusted for the optimal contrast in response to the
changes in brightness.
AI CONTROL
STANDARD
50
30
STANDARD
STANDARD
32
32
6
2
OFF
GRAPHIC
STANDARD
CINEMA
NATURAL
DYNAMIC
ON
OFF
Press the "MENU" button.
The MAIN MENU screen will be displayed.
Select "PICTURE" with the
buttons.
Press the "ENTER" button.
The PICTURE screen will be displayed.
Select "PICTURE MODE" with the
buttons.
Select "PICTURE MODE" with the
buttons.
GRAPHIC: The picture becomes suitable for input
from to the personal computer.
STANDARD: The picture becomes suitable for
moving images in general.
CINEMA: The picture becomes suitable for movie
sources.
NATURAL: The picture complies with sRGB.
DYNAMIC: The picture becomes suitable for the
use in well-lighted areas.
• Factory defaults are "GRAPHIC" for RGB system and
"STANDARD" for moving images.
Press the
"PICTURE" screen and select "AI
CONTROL".
Switch the AI control to "ON" with the
buttons.
buttons on the
51
Advertisement
Table of Contents
