Download Print this page

Samsung SWA-8000S Owner's Manual page 2

Wireless rear speaker kit
Hide thumbs Also See for SWA-8000S:

Advertisement

• To avoid electric shock, never touch the inside of this
apparatus. Only a qualified technician should open
this apparatus.
• Make sure to plug the power cord in until it is firmly
seated. When unplugging the power cord from a wall
outlet, always pull on the power cord's plug. Never
unplug by pulling on the power cord. Do not touch
the power cord with wet hands.
• If this apparatus does not operate normally - in
particular, if there are any unusual sounds or smells
coming from it - unplug it immediately and contact
an authorized dealer or service centre.
• Maintenance of Cabinet.
- Before connecting other components to this
product, be sure to turn them off.
• Be sure to pull the power plug out of the outlet if
the product is to remain unused or if you are leaving
the house for an extended period of time (especially
when children, elderly, or disabled people will be left
alone in the house).
- Accumulated dust can cause an electric shock,
an electric leakage, or a fire by causing the power
cord to generate sparks and heat or the insulation
to deteriorate.
• Contact an authorized service centre for information
if you intend to install your product in a location with
heavy dust, high or low temperatures, high humidity,
chemical substances, or where it will operate 24
hours a day such as in an airport, a train station, etc.
Failing to do so may lead to serious damage of your
product.
• Use only a properly grounded plug and wall outlet.
- An improper ground may cause electric shock or
equipment damage. (Class l Equipment only.)
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
• Do not allow children to hang on the product.
• Store the accessories (battery, etc.) in a location
safely out of the reach of children.
• Do not install the product in an unstable location
such as a shaky self, a slanted floor, or a location
exposed to vibration.
• Do not drop or strike the product. If the product is
damaged, disconnect the power cord and contact a
service centre.
• To clean this apparatus, unplug the power cord
from the wall outlet and wipe the product using a
soft, dry cloth. Do not use any chemicals such as
wax, benzene, alcohol, thinners, insecticide, air
fresheners, lubricants, or detergent. These chemicals
can damage the appearance of the product or erase
the printing on the product.
• Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids, such
as vases on the apparatus.
• Do not plug multiple electric devices into the same
wall socket. Overloading a socket can cause it to
overheat, resulting in a fire.
WARNING :
• TO PREVENT THE SPREAD OF FIRE,
KEEP CANDLES AND OTHER ITEMS
WITH OPEN FLAMES AWAY FROM
THIS PRODUCT AT ALL TIMES.
• To reduce the risk of fire or electric
shock, do not expose this appliance to rain or
moisture.
Precautions
1.
Ensure that the AC or DC power supply in your
house complies with the power requirements listed
on the identification sticker located on the back
of your product. Install your product horizontally,
on a suitable base (furniture), with enough space
around it for ventilation (7~10 cm). Make sure the
ventilation slots are not covered. Do not place the
unit on amplifiers or other equipment which may
become hot. This unit is designed for continuous
use. To fully turn off the unit, disconnect the AC
plug from the wall outlet.
2.
Do not expose the unit to direct sunlight or other
heat sources. This could lead to overheating and
cause the unit to malfunction.
3.
Unplug the Power cord from the AC wall socket
if the unit malfunctions. Your product is not
intended for industrial use. It is for personal use
only. Condensation may occur if your product has
been stored in cold temperatures. If transporting
the unit during the winter, wait approximately 2
hours until the unit has reached room temperature
before using.
4.
If this power supply is used at 240V ac, a suitable
plug adapter should be used.

Hide quick links:

Advertisement

loading