Upper Spray Arm - Asko D5654XXLHS Operating Instructions Manual

Hide thumbs Also See for D5654XXLHS:
Table of Contents

Advertisement

Upper spray arm

1 Pull out the basket.
2 Unscrew the spray arm bearings as illustrated to remove the
spray arm from the upper basket.
3 Clean the upper spray arm in the same manner as the lower
spray arm.
4 Replace the spray arm and screw the spray arm bearings
firmly back into place.
14
Spray arm bearings
Customer Care Center 1-800-898-1879
Cleaning the middle basket
1 Pull out the basket.
2 Check the holes in the spray pipe.
3 Clean with a needle or similar pointed object.
Door
When cleaning the edge around the door, use only a slightly
damp cloth (with a little cleaner if necessary).
WARNING!
Do not use a spray bottle or the like around the door lock. This
is to ensure that water does not penetrate the door catch and
come into contact with the electrical components.
Limescale deposits
The dishwasher tub is made of stainless steel and is kept clean
through normal use. However, if you have hard water, limescale
deposits may form in the dishwasher. If this happens, run the
Normal wash program with high temperature and two tablespoons
of citric acid or commercially available dishwasher cleaner in the
detergent compartment (with no dishes in the machine).
Front panel
Keep the touch buttons clean and free from grease. Wipe them
clean with a dry or slightly damp cloth. Never use cleaners – they
can scratch the surface. Use the On/Left-on mode button to turn
off the dishwasher before cleaning the touch buttons to avoid
activating any buttons unintentionally.
www.askona.com
Spray pipes

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents