Data Copy From Sd Card To Tv Set - Panasonic TX-LR32ET5 Service Manual

Data Copy from SD Card to TV set

1. Turn on the TV set.
2. Insert SD card with Data to SD slot.
On-screen Display will be appeared according to the Data folder automatically.
3. Input a following password for (a) or (b) by using remote control.
(a) For Board replacement: 2771
(b) For Hotel: 4851
Data will be copied from SD card to TV set.
4. After the completion of copying to SD card, remove SD card from TV set.
(a) For Board replacement: Data will be deleted after copying (Limited one copy).
(b) For Hotel: Data will not be deleted and can be used for other TVs.
5. Turn off the TV set.
Note:
1. Depending on the failure of boards, function of Data for board replacement does not work.
2. This function can be effective among the same model numbers.
Data Copy(Board replacement )
Input Password
Performing
Input password
Data Copy(Board replacement )
Copy SD card to TV
Please wait for a while
Please do not remove the SD card
WRITING
Performing
Data Copy(Board replacement )
Data copy has been successful
Please remove SD card
FINISH
Input Password
2771 or 4851
-----
Performing
Completion
21