Wired Lan Settings; Default Wired Lan Settings - Panasonic PT-LW80NT Network Operation Manual

Network/Security setting of the projector

Wired LAN settings

You can make detailed wired LAN settings.
Select [WIRED LAN] at the network menu and click the [ENTER] button.
WIRED DETAILED SETUP
DHCP
IP ADDRESS
SUBNETMASK
DEFAULT GATEWAY
RETURN
SELECT
DHCP :
※
ON: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
acquired.
OFF: If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP ADDRESS
[SUBNETMASK
※ "Glossary" (See page 64)
A wired LAN and wireless LAN cannot be used in the same segment.

Default wired LAN settings

The following wired LAN settings are set before the projector leaves the factory.
DHCP : OFF
IP ADDRESS : 192.168.10.100
SUBNETMASK : 255.255.255.0
DEFAULT GATEWAY : 192.168.10.1
OFF
192.168. 10.100
255.255.255. 0
192.168. 10. 1
OK CANCEL
] and [DEFAULT GATEWAY
※
(cont.)
].
※
47
],
※