Amplicomms PowerTel 96 User Manual page 123

G
ETTING STARTED
Flash time -
The display shows
Press and select
ted by the call indication light. If you select
case of new calls. Press
The display shows
ted. Press
Your telephone is ready to use and shows the idle display.
You can change this settings later at any time. Press the Set key
to open the settings menu.
120
In most situations the flash time of 100 ms should be
selected. In some cases, e. g. when connecting the
phone to a PABX, it may be necessary to switch to 270
or 600 ms. For further information please refer to the
user guide of the PABX.
NEW CALL IND.
ON
using
.
SERVICE ACCESS
to exit the settings menu.
Helpline UK 0844 800 6503
(See page 140 for costs and hours of operation)
flashing.
/ , if new calls should be indica-
OFF
the indication will not be lit in
flashing. This function is not suppor-
briefly,