Filling With Water; Vertical Ironing - Reliable Velocity 200IR Instruction Manual

Compact vapor generator iron
Table of Contents

Advertisement

Available languages

Available languages

It is switched off automatically 8 minutes after the last time it was used. This
means that once the device is activated, the 200IR no longer heats up and begins
to cool down.
At that moment a prolonged buzzer will sound and the three indicators will
momentarily light up. The light indicator of the temperature selected, (••), (•••)
or MAX will continue to flicker, indicating that the appliance has been switched
off.
To switch it on again, simply take hold of the handle. A buzzer will sound and the
200IR will return to the temperature and steam position selected before it was
switched off.
Remember that the period between being switched off and switched back
on again will affect the time that it takes for the 200IR to reach the desired
temperature.
AUTO SHUT OFF BYPASS
For those who want to leave their iron on for periods longer than 8 minutes at a
time (without the automatic shut off system activating) the Velocity 200IR has a
auto bypass feature that allows the iron to stay on indefinitely.
To activate this feature, simply press the maximum steam flow button (6) for 8
seconds (Fig. 4)
After holding the Steam Button for 8 seconds, the LEDs will flash for 5 seconds
indicating that the auto shut off bypass has been deactivated.
When the iron is unplugged, the auto shut off bypass returns to its default
position.
Do not leave your iron unattended while the auto bypass feature is activated.

FILLING WITH WATER

If while ironing the tank runs out of water, the three lights will start to flicker at a
frequency of 1 second.
1.
Switch off the 200IR, keep it upright and fill the tank using the beaker
(8) provided.
Dry the 200IR with a dry cloth if any of the water spills out of the tank. If the
appliance were to run out of water completely with the steam selector activated,
you would hear a significant vibration sound from the micro-pump. Switch off the
steam selector to prevent any damage to the system. Switch off the appliance.

VERTICAL IRONING

It enables you to remove creases from delicate garments without having to lay
then on the ironing board: jackets, coats, curtains, suede garments, etc.
1.
Place the garment on a hanger, away from the other garments, persons...
2.
Select the desired ironing temperature with the temperature selector (3), stand
the 200IR upright and press either of the two steam buttons (5 or 6).
10

Advertisement

Table of Contents
loading

Table of Contents