Updating Your Time Clock Using A Usb Flash Drive; Resetting Your Time Clock Passwords; Resetting The Software Interface Password; Resetting The Supervisor Mode Security Code - ICON SB-100 pro 2.5 User Manual

Updating Your Time Clock Using a USB Flash Drive

Updating your time clock is even faster if you use a USB flash drive.
Important: If you are using a Macintosh computer to manage your time clock software, you must update using the USB
flash drive.
1. First download the time clock update file from our website to the root
directory on your storage device.
2. www.icontime.com/universal_time_clock_update
3. Connect the storage device to the bottom of the employee time clock. Your time clock begins the update process and
automatically reboots. Wait for this process to complete.
4. When the reboot is complete, log back into your time clock.

Resetting Your Time Clock Passwords

Perform the following procedures to reset the Software Interface and time clock Supervisor Mode passwords. Use this procedure if
there is a time clock administrator change or an existing administrator forgot their password for the time clock application.

Resetting the Software Interface Password

1. Enter into Supervisor Mode:

Press

Enter in your security code - the default security code is 00 00 00.
2. Scroll through the options using Up or Down until you find the option Reset Password and press Enter.
3. Press In to reset the password or Out to cancel.
4. Once the password is reset you will receive the message Password Set Successfully on the time clock display.
5. At the time clock Login page enter the default login information, and click Submit.

Default Username: admin

Default Password: admin
6. Change your password.

Type the default administrator password.

Type your new password.

Confirm your new password.

Resetting the Supervisor Mode Security Code

The Supervisor Mode security code is set from the software interface. This code allows changes to be made at the time clock by the
administrator. The default supervisor code is 00 00 00.
It is recommended you change the default code to a new six-digit code using the procedure that follows:
1. Select Settings | Preferences from the Navigation menu.
2014-08-04
on the time clock terminal.
30 | P a g e