L2 Repair Document
9 Final test
8.1 Function Test
During the function test, the following items must be checked and validated.
2)
Cosmetic aspect of the handset,
3)
The Software Technical sticker state on the Board
4)
Switch on the handset
5)
Default welcome message
6)
Press *#2886# on the idle screen to start the auto test
8.2 Measurement
APPENDIX 1 Packaging Requirements
1、
Appearance Requirements of PCBA
ⅰ、The failure code label, commercial label, custom label and network code
should be stuck onto PCBA
ⅱ、The repair PCBA and custom label should be matched
(see appendix one for the detailed information)
Rev.
1.2
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
By NCK Team
ONE TOUCH 4005D Level 2 Repair Document
TCT
Mobile Limited
Page
26/29