Figure - Taurus MYCOOK 1.8 Instruction Manual

Figure 12

Figure 13
Figure 14
Figure 15
Figure 16
CAUTION.
For safety reasons, the lid of the jug cannot be re-
moved or fitted when secured in the central unit.
Do not use force as this could damage part of the
safety element.
The jug must be first removed from the central
unit by turning it clockwise until it stops, with
the jug base arrow lined up with the central unit
arrow, prior to removing or fitting the lid. (Figure
13).
Never activate the heating function when the jug
is empty.
Jug stand with attachment clamp
(Figure 14)
The stand is used to:
1. Fit the blades into the jug.
2. Secure the jug to the central unit:
3. Support the jug on any surface when it is hot to
prevent burns of any type.
Blades
(Figure 16)
The blades contain two lateral pivots embedded in
the stand which are used to line them up and secure
them properly with the jug.
To remove the blades from the jug:
1. Turn the attachment clamp 180 º into the open
position and pull it from the jug stand, as indicated
by the arrows. (Figures 17 and 18).
2. Remove the blades from the jug, being careful not
to cut yourself (Figure 19).
9
ENGLISH
(Figure 15).