Panasonic KX-P7110 Network Setup Manual page 2

4
Click KX-P7110 and click Install Network
Utilities.
5
Follow the instructions until the screen below is
displayed.
6
Click on the
Finish
.
7
Click the KX-P7110 printer you want to set up in
the list.
To select the printer, refer to the MAC address
confirmed at step 2.
8
Click the Setup menu and select Network
Setup....
9
Click the TCP/IP tab.
10
Remove the check of the Use DHCP/BOOTP
check box, then enter IP address, Subnet Mask
and Default Gateway. Click
11
Confirm the setting and click
You will see the message "Update is completed.
Do you wish to reset the printer?".
12
Yes
Click
13
Click Device menu and select Exit.
2
Yes
check button, and then click
Setup
OK
.
.
Step 3: Installing the LPR Port on the
Computer
1
Confirm the printer is ready for printing.
2
Insert the printer CD-ROM into the CD-ROM
drive and click KX-P7110.
3
Click Install Network Port.
4
Follow the instructions until the screen below is
displayed.
5
Click on the Yes check button, and then click
Finish
6
Click on the Print by using LPR check button
and click
7
Enter the IP address or host name of the
printer.
• Clicking
the network.
8
Click
9
Change the print port name (ex. KX-P7110
No.1) if needed.
• By default, the IP address: lp will be automatically
assigned to the Destination print port name.
Note:
• Destination print port name should be a unique
.
name because it is used as the printer port name
when setting the printer driver.
10
Click
11
Click
.
Next .
will display the list of printers on
Search
Next .
Next
.
Finish
.