Lead Free Information; Handling The Flexible Flat Cable (Ffc) - Sony KDL-40W580B Service Manual

Safety Notes

1-7. Lead Free Information

The circuit boards used in these models have been processed using Lead
Free Solder. The boards are identified by the LF logo located close to the
board designation.
Figure 4: LF Logo
The servicing of these boards requires special precautions. It is strongly
recommended to use Lead Free Solder material in order to guarantee optimal
quality of new solder joints.
1-8. Handling the FLEXIBLE FLAT CABLE (FFC
 When you insert / pull out FFC, please grasp a reinforcement board and main
body of FFC.
Figure 5: LF logo on circuit board
)
W580B/W585B/W590B/W600B/W605B/W607B/W608B/WM15B
Please hold reinforcement board and
plunge it to depths.
Main Board
< Insertion>
RB2G
CHASSIS
Please pull out FFC while pushing the
button of both ends at the same time.
Main Board
<Pull out>
7