Power On; Setting The Lcd Language; Printing A Test Page From The Printer Panel - Panasonic KX-CL500 Setup Manual

Setup

Power On

Turn the printer on, then the computer.
The READY indicator on the printer starts blinking.
After approximately 30 seconds [Standard Memory
without the printer's hard disk drive at 20°C (68°F) /
65%RH / 120V], "Ready" is displayed on the printer LCD
panel.
NOTE:
• If the Self Calibration is done, it will take much time.
• When the printer enters the Power Save mode, the
POWER indicator will start blinking and "Power Save"
will be displayed on the printer LCD panel.
• When you turn on the printer for the first time, it will take
about 5 minutes to fill the printer with toner. When the
process is completed, the printer's LCD will display
"Ready".

Setting the LCD Language

• Select English, German, French, Spanish or Italian as
the language which is to appear on the LCD panel.
• English is the default language.
1
Press MENU/EXIT (PAUSE) button to enter the
Menu mode.
2
Press (CONTINUE) or
the Other menu appears.
3
Press ENTER button.
Language item menu appears.
4
Press ENTER button.
English selection menu appears.
5
Press (CONTINUE) or
the desired language is displayed.
6
Press ENTER button to activate your selection.
NOTE:
• Adhere the enclosed "Supplies Re-order Label" near the
printer's LCD panel to assist you in interpreting the
supplies related messages that may appear on the
printer's LCD display.
Printing a Test Page from
the Printer Panel
It is possible to confirm the printer's settings by printing a
configuration page.
1
Press MENU/EXIT (PAUSE) button to enter the
Menu mode.
2
Press (CONTINUE) button until Test Page menu
appears.
3
Press ENTER button.
Menu Map item menu appears.
4
Press (CONTINUE) button until Configuration
Page item menu appears.
5
Press ENTER button.
The printer will start printing a configuration page.
(CANCEL) button until
(CANCEL) button until
29