Advertisement
Option 2: Time switch with the same 7 day selection (P11=1)
set
You can set all the 7 day time switches at the same
time.
ok
Example:
+
1
–
mode
0
6
Visible bars: Control to Comfort temperature
Invisible bars: Control to Economy temperature
Proceed as follows:
1) Set the parameter (P11=1). Please refer to the
section "Do you want to change parameters".
2) Press set and select
3) Press ok to confirm.
4) Time switch for period Mon (1) - Sun (7) is
displayed.
5) Press ok to initiate time programming.
During programming step:
6) Press mode to select an operating mode, (Comfort
or Economy) or
+
–
7) Press
or
to adjust time setpoint by 15 minutes
for the selected mode.
8) Press ok to save the time switch.
9) Press mode or wait for the program to exit
automatically.
Option 3: Time switch with 5-2 day selection (P11=2)
set
You can set Monday - Friday time switch at once and
Saturday - Sunday time switch at once.
ok
Example:
+
1
–
mode
0
6
Visible bars: Control to Comfort temperature
Invisible bars: Control to Economy temperature
Proceed as follows:
1) Set the parameter (P11=2). Please refer to the
section "Do you want to change parameters".
2) Press set and select
3) Press ok to confirm.
4) Time switch for period Mon(1) - Fri(5) is displayed.
+
–
5) Press
or
to select the period, Mon (1) - Fri( 5) or
Sat (6) - Sun (7).
6) Press ok to confirm the selected period and initiate
time programming.
During programming step:
7) Press mode to select an operating mode, (Comfort or
Economy) or
+
–
8) Press
or
to adjust the time setpoint by 15
minutes for the selected mode.
9) Press ok to save the time switch.
10) Repeat the steps 5-9 for the other period if
necessary; or
11) Press mode or wait for the program to exit
automatically.
3/4
Operating Instructions
2
1 8
1 2
2 4
.
AUTO
2
1 8
1 2
2 4
.
AUTO
CB1B1423en_01 / 2013-03-08
Factory default for 7-day Time switch
Default
Day/s
Comfort mode
value
Mo (1) – Fr (5)
6:00 – 8:00 hr
17:00 – 22:00 hr
Sa (6) – Su (7)
Do you want to activate DHW control?
•
Press
to switch on DHW heating
•
While DHW heating is switched on, the
symbol is displayed
•
Press
again
•
DHW is in the auto status, the
displayed. DHW switches according to the DHW
time switch.
If you want to see the DHW time bar, press and
hold
for 5 seconds. The time bar flashes to
show the programmed DHW times. The timeout
of the DHW timer bar is set with parameter P13
•
Press
again
•
DHW heating is switched off and the symbol
disappears
DHW can also be switched on/off while frost protection
is active.
Do you want to enter your own time switch for
DHW control?
You can enter the DHW Auto Time switch as follows:
•
Press set and select
set
You can select DHW on or off for every 15 minutes
ok
interval of the day. The 0:00 to 24:00 hour time bar
allows you to set DHW on or off for the selected day(s).
Example:
1
0
6
Visible bars: DHW control is switched on
Invisible bars: DHW control is switched off
There are 3 options for DHW Time switch setting:
Individual day, 7 day and 5/2 day.
To set the DHW Time switch, please follow the same
steps as in the section "Do you want to enter your
own time switch".
Factory default of 7-day time switch for DHW
Day/s
Default
value
Mo (1) – Fr (5)
Sa (6) – Su (7)
Does symbol
appear on the display?
Symbol
is displayed when the batteries are low. Replace them
with 2 new alkaline batteries type AAA. Proceed as follows:
•
Get 2 new alkaline batteries type AAA
•
Remove the battery holder, then the batteries, insert the new
batteries and, within 1.5 minutes, replace the battery holder
•
Ensure the exhausted batteries are disposed of correctly, in
compliance with environmental requirements
Economy mode
22:00 – 6:00 hr
8:00 – 17:00 hr
7:00 – 22:00 hr
22:00 – 7:00 hr
symbol is
AUTO
, then press ok
AUTO
2
1 8
1 2
2 4
DHW control ON
DHW control
OFF
6:00 – 8:00 hr
22:00 – 6:00 hr
17:00 – 22:00 hr
8:00 – 17:00 hr
7:00 – 22:00 hr
22:00 – 7:00 hr
Siemens Building Technologies
Advertisement
