Honda 1998 Odyssey Owner's Manual page 206

Replacing the Front Side Marker/
Turn Signal and Parking Light
Bulb
SCREW
1. Use a Phillips-head screwdriver to
remove the screw from the top of
the fender.
2. Move the side marker light
assembly forward until it slides out
of the body.
3. Turn the socket one-quarter turn
counterclockwise to remove it
from the lens.
4. Remove the bulb by pushing it in
slightly and turning it counter-
clockwise.
5. Install the new bulb in the socket.
Turn it clockwise to lock it in place.
6. Insert the socket back into the
lens. Turn it clockwise to lock it in
place.
7. Put the side marker assembly
back into the body. Align the four
tabs and push on the front edge
until it snaps into place.
Install the mounting screw and
tighten it securely.
Maintenance
Lights