Honda 1998 Odyssey Owner's Manual page 191

Wiper Blades
BLADE
REINFORCEMENT
4. Examine the new wiper blades. If
they have no plastic or metal rein-
forcement along the back edge,
remove the metal reinforcement
strips from the old wiper blade and
install them in the slots along the
edge of the new blade.
Maintenance
5. Slide the new wiper blade into the
holder until the tabs lock.
6. Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
7. Lower the wiper arm down against
the windshield.
To replace the rear wiper blade:
1. Raise the wiper arm off the
windshield.
2. Pull the lock tab up and slide the
blade assembly off the wiper arm.
3. Pull one end of the blade out and
down to remove it from the slot.