Toyota 2014 Prius Manual page 486

STEP 4
Start the engine of the second vehicle. Increase the engine
speed slightly and maintain that level for approximately 5
minutes to recharge the 12-volt battery of your vehicle.
STEP 5
Vehicles with a smart key system only: Open and close any
of the doors of your vehicle with the "POWER" switch off.
STEP 6
Vehicles without a smart key system
Maintain the engine speed of the second vehicle and start
the hybrid system of your vehicle by turning the engine
switch to the "ON" position.
Vehicles with a smart key system
Maintain the engine speed of the second vehicle and start
the hybrid system of your vehicle by turning the "POWER"
switch to ON mode.
STEP 7
Make sure the "READY" indicator comes on. If the indicator
does not come on, contact your Toyota dealer.
STEP 8
Once the hybrid system has started, remove the jumper
cables in the exact reverse order from which they were con-
nected.
STEP 9
Close the exclusive jump starting terminal cover, and rein-
stall the fuse box cover to its original position.
When installing, first hook the fuse box cover onto the two rear
tabs.
Once the hybrid system starts, have the vehicle inspected at your
Toyota dealer as soon as possible.
5-2. Steps to take in an emergency
5
483