Honda 2004 Civic Si Owner's Manual page 95

Playing the Radio
If you are
AUTO SELECT −
traveling far from home and can no
longer receive your preset stations,
you can use the Auto Select feature
to find stations in the local area.
Press the A. SEL Button. ''A.SEL''
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM, and twelve FM stations in
the preset buttons.
You will see a ''0'' displayed after
pressing a preset button if Auto
Select cannot find a strong station
for every preset button.
If you do not like the stations Auto
Select has stored, you can store
other frequencies on the preset
buttons. Use the TUNE, SEEK, or
SCAN functions to find stations, then
store them in the preset buttons as
described.
92
Comfort and Convenience Features
press the
To turn off Auto Select,
A. SEL button. This restores the
presets you originally set.
Adjusting the Sound
Press the SOUND/TUNE knob
repeatedly to display the Bass (BAS),
Treble (TRE), Fader (FAD), and
Balance (BAL) setting.
Each mode is shown in the display as
it changes. Turn the SOUND/TUNE
knob to adjust the setting to your
liking. When the level reaches the
center, you will see ''C'' in the display.
The system will automatically return
the display to the selected audio
mode about five seconds after you
stop adjusting a mode.
Treble/Bass Use the TRE/BAS
−
modes to adjust the tone to your
liking.
Balance/Fader − These two
modes adjust the strength of the
sound coming from each speaker.
BAL adjusts the side-to-side strength,
while FAD adjusts the front-to-back
strength.
Audio System Lighting
You can use the instrument panel
brightness control knob to adjust the
illumination of the audio system (see
page 62 ). The audio system
illuminates when the parking lights
are on, even if the radio is off.