Honda 2004 Civic Si Owner's Manual page 150

4. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
5. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
6. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
7. Test the lights to make sure the
new bulb is working.
8. Put the inner fender cover in place.
SOCKET
Install the holding clip. Lock it in
place by pushing on the center.
BULB
Replacing a Side Marker Bulb
SOCKET BULB
1. Front bumper: Push the front
edge of the side marker lens
toward the rear of the vehicle. The
front edge will pop out of the
bumper.
Rear bumper: Push the rear edge
of the side marker lens toward the
front of the vehicle. The rear edge
will pop out of the bumper.
Maintenance
Lights
147