Honda 2004 Civic Si Owner's Manual page 149

Lights
3. Remove the bulb by turning it one-
quarter turn counterclockwise.
4. Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
5. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
6. Turn on the headlights to test the
new bulb.
7. If you loosened the bolt on the
battery plate, tighten it securely.
146
Maintenance
Replacing a Front Turn Signal
Bulb
1. If you are changing the bulb on
the driver's side, start the engine,
turn the steering wheel all the way
to the right, and turn off the
engine. If you are changing the
bulb on the passenger's side, turn
the steering wheel to the left.
HOLDING CLIP
2. Use a flat-tipped screwdriver to
remove the holding clip from the
inner fender.
3. Pull the inner fender cover back.