Toyota 2013 Matrix Manual page 316

Hide thumbs Also See for 2013 Matrix:
Table of Contents

Advertisement

Engine oil
With the engine at operating temperature and turned off, check the oil
level on the dipstick.
Checking the engine oil
STEP
1
Park the vehicle on level ground. After warming up the engine
and turning it off, wait more than 5 minutes for the oil to drain
back into the bottom of the engine.
STEP
2
STEP
3
Wipe the dipstick clean.
1.8 L 4-cylinder (2ZR-FE) engine with flat dipstick and 2.4 L 4-cyl-
inder (2AZ-FE) engine
STEP
4
Reinsert the dipstick fully.
1.8 L 4-cylinder (2ZR-FE) engine with non-flat dipstick
STEP
4
STEP
5
Holding a rag under the end, pull the dipstick out and check
the oil level.
STEP
6
Wipe the dipstick and reinsert it fully.
4-3. Do-it-yourself maintenance
Hold a rag under the end and
pull the dipstick out.
Reinsert the non-flat dipstick fully
with its protruding areas (
the illustration) pointing towards
the engine.
4
in
337

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents