Page 1 TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column. When driving Driving, stopping and safe-driving information. Interior fea- Air conditioning and audio systems, as well as other in- tures terior features for a comfortable driving experience. Maintenance Cleaning and protecting your vehicle, performing do-it- and care...
Page 2: For Your Information
A wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available on the market. You should know that these parts are not covered by Toyota warranty and that Toyota is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 3 Furthermore, these computers do not record con- versations, sounds or pictures. ● Data usage Toyota may use the data recorded in these computers to diagnose malfunc- tions, conduct research and development, and improve quality. Toyota will not disclose the recorded data to a third party except: •...
Page 4 Event data recorder This vehicle is equipped with an event data recorder (EDR). The main pur- pose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed.
Page 5 ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehicle) is obtained • In response to an official request by the police, a court of law or a govern- ment agency •...
Page 6 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 7 This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 9 Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 424) ■...
Page 10 1-1. Key information NOTICE ■ To prevent key damage ● Do not subject the keys to strong shocks, expose them to high tempera- tures by placing them in direct sunlight, or get them wet. ● Do not expose the keys to electromagnetic materials or attach any mate- rial that blocks electromagnetic waves to the key surface.
Page 11 1-2. Opening, closing and locking the doors ∗ Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle. Locks all doors Sounds an alarm (press and hold) Unlocks doors Pressing the button unlocks the driver’s door.
Page 12 When the wireless key battery is depleted ● If window tint with a metallic content or metallic objects are attached to the rear window ■ Customization that can be configured at Toyota dealer Settings (e.g. operation signal) can be changed. (Customizable features →P. 469)
Page 13 1-2. Opening, closing and locking the doors ■ Certification for wireless remote control For vehicles sold in the U.S.A. NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 14 1-2. Opening, closing and locking the doors Doors The vehicle can be locked and unlocked using the wireless remote control, key or door lock switch. ■ Wireless remote control (if equipped) →P. 28 ■ Locks the door Unlocks the door Vehicles with power door lock system: Turning the key locks and unlocks all doors.
Page 15 1-2. Opening, closing and locking the doors ■ Inside lock button Unlocks the door Locks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position. Rear door child-protector lock The door cannot be opened from inside the vehicle when the locks are set.
Page 16 1-2. Opening, closing and locking the doors Automatic door locking and unlocking systems (vehicles with power door lock system) The following functions can be set or cancelled: Function Operation Shift position linked Shifting the shift lever out of P locks all door locking function doors.
Page 17 1-2. Opening, closing and locking the doors ■ Setting and canceling the functions To switch between set and canceled, follow the procedure below: STEP Close all the doors and switch the engine switch to the “ON” position. (Perform step 2 within 10 seconds.) Shift the shift lever to P or N, and STEP press and hold the driver's door...
Page 18 The doors cannot be locked when The key is in the engine switch and either of the front door is open. ■ Customization that can be configured at Toyota dealer Settings (e.g. unlocking function using a key) can be changed. (Customizable features →P. 469) CAUTION ■...
Page 19 1-2. Opening, closing and locking the doors Back door The back door can be locked and unlocked using the wireless remote control or key. Wireless remote control (if equipped) →P. 28 Locks the back door Unlocks the back door Opens the back door ■...
Page 20 1-2. Opening, closing and locking the doors CAUTION ■ Caution while driving ● Keep the back door closed while driving. If the back door is left open, it may hit nearby objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard.
Page 21 Doing so may cause hands to be caught or the back door damper stay to break, causing an accident. ● Do not attach any accessories other than genuine Toyota parts to the back door. Such additional weight on the back door may cause the back door to suddenly shut again after it is opened.
Page 22 Do not touch the damper stay rod with gloves or other fabric items. ● Do not attach any accessories other than genuine Toyota parts to the back door. ● Do not place your hand on the damper stay or apply lateral forces to it.
Page 23 1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only) Folding down the front passenger's seat (vehicles with seatback table) Move the seat rearward. STEP...
Page 24 1-3. Adjustable components (seats, mirrors, steering wheel) Lower the head restraint and fix STEP the seatback at the most upright lock position. Pull up either seatback lock STEP release knob beside the seat- back and fold the seatback down. Active head restraints When occupant’s back...
Page 25 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Active head restraints Even small forces applied to the seatback may cause the head restraint to move. Pushing up a locked head restraint forcibly may appear the head restraint inner structure. These do not indicate problems. During rear-end collision...
Page 26 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ After returning the seatback to the upright position (vehicles with seat- back table) Make sure the seatback is securely locked by pressing forward and rear- ward on the top of the seatback. Failure to do so will prevent seat belt from operating properly.
Page 27 1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats The seatbacks of the rear seats can be folded down. Stow the rear outside seat belt STEP buckles and move the rear center seat belt buckle as shown. Lower the head restraints to STEP the lowest position.
Page 28 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ After returning the seatback to the upright position Observe the following precautions. Failure to do so may result in death or serious injury. ● Make sure that the seatback is securely locked in position by lightly rocking it back and forth.
Page 29 1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Pull the head restraints up. Down Lock release Push the head restraint down button while pushing the lock release button. ■ Removing the head restraints Pull the head restraint up while pushing the lock release button.
Page 30 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. ■ Adjusting the rear center seat head restraint Always raise the head restraint one level from the stowed position when using.
Page 31 1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 32 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the belt (front seats) Push the seat belt shoulder anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed.
Page 33 ■ Seat belt extender If your seat belts cannot be fastened securely because they are not long enough, personalized seat belt extender is available from your Toyota dealer free of charge.
Page 34 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
Page 35 ● Ensure that the belt and tab are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 36 1-3. Adjustable components (seats, mirrors, steering wheel) NOTICE ■ When using a seat belt extender When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and the extender itself.
Page 37 1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and STEP press the lever down. Adjust to the ideal position by STEP moving the steering wheel horizontally and vertically.
Page 38 1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror Normal position Anti-glare position Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and the reflected light is automatically reduced.
Page 39 1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of the rear view mirror Adjust the height of the rear view mirror by moving it up and down. ■ To prevent sensor error To ensure that the sensors operate prop- erly, do not touch or cover them.
Page 40 1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch. Select a mirror to adjust. STEP Left Right Adjust the mirror. STEP Right Down Left Folding back the mirrors Push backward to fold the mir- rors.
Page 41 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Mirror angle can be adjusted when The engine switch is in the “ACC” or “ON” position. ■ When the mirrors are fogged up (vehicles with outside rear view mirror defoggers) Turn on the mirror defoggers to defog the mirrors. (→P. 193) CAUTION ■...
Page 42 1-4. Opening and closing the windows and moon roof ∗ Power windows The power windows can be opened and closed using the following switches. Closing Opening One-touch opening (driver’s window only) Pressing the switch in the opposite direction will stop win- dow travel partway.
Page 43 1-4. Opening and closing the windows and moon roof CAUTION ■ Closing the windows Observe the following precautions. Failing to do so may result in death or serious injury. ● Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a window is being operated.
Page 44 1-4. Opening and closing the windows and moon roof ∗ Moon roof Use the overhead switches to open, close, and tilt the moon roof up and down. ■ Opening and closing Opens the moon roof* The moon roof stops slightly before the fully open position to reduce wind noise.
Page 45 1-4. Opening and closing the windows and moon roof ■ The moon roof can be operated when The engine switch is in the “ON” position. ■ Operating the moon roof after turning the engine OFF The moon roof can be operated for approximately 45 seconds after the engine switch is turned to the “ACC”...
Page 46 1-4. Opening and closing the windows and moon roof CAUTION ■ Opening the moon roof Observe the following precautions. Failing to do so may cause death or serious injury. ● Do not allow any passengers to put their hands or heads outside the vehi- cle while it is moving.
Page 47 1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle Turn the engine switch OFF and ensure that all the doors and windows are closed. ■ Opening the fuel tank cap Pull up the fuel filler door STEP opener.
Page 48 1-5. Refueling Closing the fuel tank cap When replacing the fuel tank cap, turn it until a clicking sound is heard. After releasing your hand, the cap will turn slightly to the opposite direction. ■ Fuel type Unleaded gasoline (Octane rating 87 [Research Octane Number 91] or higher) ■...
Page 49 This may cause static electricity to build up, resulting in a possible ignition hazard. ■ When replacing the fuel cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 50 1-5. Refueling NOTICE ■ Refueling Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle's painted surface.
Page 51 1-6. Theft deterrent system Engine immobilizer system The vehicle's keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle's on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. The indicator light flashes after the key has been removed from the engine switch to indi-...
Page 52 1-6. Theft deterrent system ■ Certifications for the engine immobilizer system (for vehicles sold in Canada) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.
Page 53 1-6. Theft deterrent system Theft prevention labels (except for Canada) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law.
Page 54 1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. (→P. 40) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 55 1-7. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver's seat while driving. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
Page 56 1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags Driver airbag and front passenger airbag Can help protect the head and chest of the driver and front pas-...
Page 57 1-7. Safety information Airbag system components Front airbag sensors SRS warning light Front passenger occupant Front passenger’s seat belt classification system (ECU buckle switch and sensors) Airbag sensor assembly Front passenger airbag Curtain shield airbag sen- Side airbags sors Seat belt pretensioners and Driver airbag force limiters Driver’s seat belt buckle...
Page 58 1-7. Safety information Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on infor- mation obtained from the sensors etc. shown in the system compo- nents diagram above.
Page 59 1-7. Safety information ■ SRS airbag deployment conditions (SRS front airbags) ● The SRS front airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to an approxi- mately 12 - 18 mph [20 - 30 km/h] frontal collision with a fixed wall that does not move or deform).
Page 60 1-7. Safety information ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. ●...
Page 61 1-7. Safety information ■ Types of collisions that may not deploy the SRS side airbags and cur- tain shield airbags The SRS side airbags and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a col- lision to the side of the vehicle body other than the passenger compartment.
Page 62 1-7. Safety information ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or...
Page 63 1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly. The SRS airbags are supplemental devices to be used with the seat belts.
Page 64 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are the safest for infants and children.
Page 65 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger. ● Do not drive the vehicle while the driver or passenger has items resting on their knees.
Page 66 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not attach anything to areas such as the door, windshield glass, side door glass, front and rear pillars, roof side rail or assist grip. ● Do not hang coat hangers or other hard objects on the coat hooks.
Page 67 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ■ Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer.
Page 68 1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for the front passenger.
Page 69 1-7. Safety information Conditions and operation of the front passenger occupant classification system ■ Adult “AIR BAG ON” and “AIR BAG OFF” indicator “AIR BAG lights ON” Indicator/ SRS warning light warning light Front passenger’s seat belt reminder light Flashing Front passenger airbag Side airbag on the front passenger seats...
Page 70 1-7. Safety information ■ Unoccupied “AIR BAG ON” and “AIR BAG OFF” indicator Not illuminated lights Indicator/ warning light SRS warning light Front passenger’s seat belt reminder light Front passenger airbag Deactivated Side airbag on the front passenger seats Devices Activated Curtain shield airbag in the front passenger side...
Page 71 1-7. Safety information : Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. (→P. 90) : In case the indicator is not illuminated, consult this manual as for installing the child restraint system properly.
Page 72 Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.
Page 73 1-7. Safety information Child restraint systems A child restraint system for a small child or baby must be properly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of U.S.A. and Canada now require the use of child restraint systems.
Page 74 1-7. Safety information Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child. Rear facing ⎯ Infant seat/convertible seat Forward facing ⎯ Convertible seat Booster seat...
Page 75 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 76 1-7. Safety information CAUTION ■ Child restraint precautions ● Do not use the seat belt extender when installing a child restraint system on the front or rear passenger seat. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or seri- ous injury to the child or other passengers in the event of a sudden stop, sudden swerve or accident.
Page 77 1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system.
Page 78 1-7. Safety information Installation with LATCH system Type A STEP Widen the gap between the seat cushion and seatback slightly. STEP Latch the hooks of the lower straps onto the LATCH anchors. STEP If the child restraint has a top tether strap, the top tether strap should be latched onto...
Page 79 1-7. Safety information Type B STEP Widen the gap between the seat cushion and seatback slightly. STEP Latch the buckles onto the LATCH anchors. STEP If the child restraint has a top tether strap, the top tether strap should be latched onto tether strap anchors.
Page 80 1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear facing ⎯ Infant seat/convertible seat ■ Place the child seat on the rear STEP seat facing the rear of the vehi- cle. Run the seat belt through the STEP child seat and insert the plate into the buckle.
Page 81 1-7. Safety information While pushing the child seat STEP down into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 82 1-7. Safety information While pushing the child seat into STEP the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 83 1-7. Safety information Removing a child restraint installed with a seat belt Push the release button and fully retract the seat belt.
Page 84 1-7. Safety information Child restraint systems with a top tether strap Secure the child restraint using STEP the seat belt or the lower anchors, and remove the head restraint. Open the anchor bracket cover, STEP latch the hook onto the anchor bracket and tighten the top tether strap.
Page 85 1-7. Safety information CAUTION ■ When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALR lock mode: (→P. 49) ALR mode causes the belt to tighten only which could cause injury or dis- comfort to the child.
Page 86 1-7. Safety information CAUTION ■ When installing a child restraint system ● When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child's shoulder. The belt should be kept away from the child's neck, but not so that it could fall off the child's shoulder.
Page 87 1-7. Safety information...
Page 88 2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. ■ Starting the engine →P. 118 ■ Driving Automatic transmission STEP With the brake pedal depressed, shift the shift lever to D. (→P. 122) STEP Release the parking brake.
Page 89 2-1. Driving procedures ■ Parking the vehicle Automatic transmission STEP With the shift lever in D, depress the brake pedal. STEP Set the parking brake. (→P. 130) STEP Shift the shift lever to P. (→P. 122) When parking on a hill, if necessary, block the wheels. STEP Turn the engine switch to the “LOCK”...
Page 90 2-1. Driving procedures Starting on a steep uphill Automatic transmission STEP Firmly set the parking brake and shift the shift lever to D. STEP Gently depress the accelerator pedal. STEP Release the parking brake. Manual transmission STEP With the parking brake firmly set and the clutch pedal fully depressed, shift the shift lever to 1.
Page 91 Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodically or when- ever the parking brake shoes and/or drum are replaced. Have your Toyota dealer perform the bedding down.
Page 92 2-1. Driving procedures CAUTION ■ When starting the vehicle (vehicles with an automatic transmission) Always keep your foot on the brake pedal while stopped with the engine run- ning. This prevents the vehicle from creeping. ■ When driving the vehicle ●...
Page 93 Large amounts of exhaust in the vehi- cle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately. ●...
Page 94 2-1. Driving procedures CAUTION ● When stopped on an inclined surface, use the brake pedal and parking brake to prevent the vehicle from rolling backward or forward and causing an accident. ● Do not adjust the position of the steering wheel, the seat, or the inside or outside rear view mirrors while driving.
Page 95 2-1. Driving procedures CAUTION ■ When shifting the shift lever (vehicles with an automatic transmission) Be careful not to shift the shift lever with the accelerator pedal depressed. This may lead to unexpected rapid acceleration of the vehicle that may cause an accident and result in death or serious injury.
Page 96 The exhaust should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard.
Page 97 2-1. Driving procedures CAUTION ■ When braking the vehicle ● When the brakes are wet, drive more cautiously. Braking distance increases when the brakes are wet, and may cause one side of the vehicle to brake differently than the other side. Also the parking brake may not securely hold the vehicle.
Page 98 2-1. Driving procedures NOTICE ■ When driving the vehicle ● Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain driving torque. Manual transmission ● Do not shift gears unless the clutch pedal is fully depressed. After shifting, do not release the clutch pedal abruptly.
Page 99 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage can result if the pads are not replaced when needed.
Page 100 2-1. Driving procedures Engine (ignition) switch ■ Starting the engine Automatic transmission STEP Check that the parking brake is set. STEP Check that the shift lever is set in P. STEP Sit in the driver’s seat and firmly depress the brake pedal. STEP Turn the engine switch to the “START”...
Page 101 2-1. Driving procedures ■ Changing engine switch position “LOCK” The steering wheel is locked and the key can be removed. (Vehicles with an automatic transmission: The key can be removed only when the shift lever is in P.) “ACC” Some electrical components such as the audio system can be used.
Page 102 2-1. Driving procedures ■ Turning the engine switch from “ACC” to “LOCK” STEP Shift the shift lever to P (auto- matic transmission) or N (man- ual transmission). (→P. 122, 127) STEP Push in the key and turn to the “LOCK” position. ■...
Page 103 2-1. Driving procedures NOTICE ■ To prevent battery discharge Do not leave the key in the “ACC” or “ON” position for long periods if the engine is not running. ■ When starting the engine 2.4 L 4-cylinder (2AZ-FE) engine ⎯ Do not crank for more than 30 sec- ●...
Page 104 2-1. Driving procedures ∗ Automatic transmission Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Standard type Multi-mode type While the engine switch is in the “ON” position, depress the brake pedal and move the shift lever. ∗...
Page 105 2-1. Driving procedures ■ Shift position uses Function Shift position Standard type Multi-mode type Parking the vehicle or starting the engine Reversing Neutral Normal driving S mode driving (→P. 124) Position for engine braking Position for more powerful engine braking Position for maximum engine braking : Shifting to the D position allows the system to select a gear suitable...
Page 106 2-1. Driving procedures Changing shift ranges in S mode (multi-mode type) Shift the shift lever to the S position and operate the shift lever. Upshifting Downshifting The initial shift range in S mode is automatically set to 4 or 5. How- ever, the initial shift range may be set to 3 if AI-SHIFT has operated while the shift lever was in the D position.
Page 107 2-1. Driving procedures ■ Shift ranges and their functions Shift range Function A gear between 1 and 5 is automatically selected according to vehicle speed and driving conditions. A gear between 1 and 4 is automatically selected according to vehicle speed and driving conditions. A gear between 1 and 3 is automatically selected according to vehicle speed and driving conditions.
Page 108 If the “S” indicator does not come on even after shifting the shift lever to S (multi-mode type) This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the vehicle will operate as if the shift lever is in D.) ■...
Page 109 2-1. Driving procedures ∗ Manual transmission ■ Shifting the shift lever Fully depress the clutch pedal before operating shift lever, and then release the clutch pedal slowly. ■ Maximum allowable speeds Observe the following maximum allowable speeds in each gear when maxi- mum acceleration is necessary.
Page 110 2-1. Driving procedures 2.4 L 4-cylinder (2AZ-FE) engine (with double wishbone rear suspension) mph (km/h) Shift position Maximum speed 31 (50) 54 (87) 83 (134) 113 (183) 1.8 L 4-cylinder (2ZR-FE) engine mph (km/h) Shift position Maximum speed 34 (55) 56 (91) 82 (132) 121 (195)
Page 111 2-1. Driving procedures Turn signal lever Right turn Left turn Move and hold the lever partway to signal a lane change. The right hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change.
Page 112 2-1. Driving procedures Parking brake U.S.A. Canada Sets the parking brake Fully set the parking brake while depressing the brake pedal. Releases the parking brake Slightly raise the lever and lower it completely while pressing the but- ton. ■ Usage in winter time See “Winter driving tips”...
Page 113 2-1. Driving procedures Horn To sound the horn, press on or close to the mark. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (→P.
Page 114 2-2. Instrument cluster Gauges and meters The following gauges, meters and displays illuminate when the engine switch is in the “ON” position. Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining in the tank. Outside temperature display Displays the outside air temperature.
Page 115 2-2. Instrument cluster Engine coolant temperature gauge Displays the engine coolant temperature. Automatic transmission shift position indicator lights (if equipped) →P. 122 Odometer and trip meter Odometer: Displays the total distance the vehicle has been driven. Trip meter: Displays the distance the vehicle has been driven since the meter was last reset.
Page 116 2-2. Instrument cluster Instrument panel light control The brightness of the instrument panel lights can be adjusted. Darker Brighter When the headlight switch is turned on, the brightness will be reduced slightly unless the con- trol button is turned fully clock- wise.
Page 117 2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster Center panel...
Page 118 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details.
Page 119 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details.
Page 120 2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually. Type A daytime run- ning lights turn on. side marker, parking, tail, license plate, daytime run- ning lights instrument panel lights turn on. The headlights and all lights listed above (except daytime run- ning lights) turn on.
Page 121 2-3. Operating the lights and wipers Type B daytime run- ning lights turn on. side marker, parking, tail, license plate, daytime run- ning lights instrument panel lights turn on. The headlights and all lights listed above (except daytime run- ning lights) turn on. Turning on the high beam headlights With the headlights on, push the lever forward to turn on the...
Page 122 2-3. Operating the lights and wipers ■ Daytime running light system ● To make your vehicle more visible to other drivers, the headlights turn on automatically whenever the engine is started and the parking brake is released. ● Compared to turning on the headlights, the daytime running light system offers greater durability and consumes less electricity, so it can help improve fuel economy.
Page 123 2-3. Operating the lights and wipers ∗ Fog light switch The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on low beam. Type A Front fog lights on ∗...
Page 124 2-3. Operating the lights and wipers Type B Front fog lights on...
Page 125 2-3. Operating the lights and wipers Windshield wipers and washer Wiper can be operated manually. Type A Intermittent wind- shield wiper opera- tion speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation Increases the intermittent windshield wiper frequency* Decreases the intermittent windshield wiper frequency*...
Page 126 2-3. Operating the lights and wipers Wash/wipe operation Wipers operate automatically. Type B Intermittent wind- shield wiper opera- tion speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation Increases the intermittent windshield wiper frequency* Decreases the intermittent windshield wiper frequency* If equipped...
Page 127 2-3. Operating the lights and wipers Wash/wipe operation Wipers operate automatically. ■ The windshield wipers and washers can be operated when The engine switch is in the “ON” position. ■ If no windshield washer fluid sprays Check that the washer nozzles are not blocked and if there is washer fluid in the windshield washer fluid reservoir.
Page 128 2-3. Operating the lights and wipers ∗ Rear window wiper and washer Type A Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation Wiper operates automatically. Washer/wiper dual operation Wiper operates automatically. ∗ : If equipped...
Page 129 2-3. Operating the lights and wipers Type B Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation Wiper operates automatically. Washer/wiper dual operation Wiper operates automatically. ■ The rear window wiper and washer can be operated when The engine switch is in “ON”. NOTICE ■...
Page 130 2-4. Using other driving systems ∗ Cruise control Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch ■ Setting the vehicle speed Press the “ON-OFF” button to STEP activate the cruise control. Cruise control indicator will come on.
Page 131 2-4. Using other driving systems ■ Adjusting the speed setting To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 132 2-4. Using other driving systems ■ Canceling and resuming the constant speed control Pulling the lever toward you cancels the constant speed control. The speed setting is also can- celed when the brakes are applied or the clutch pedal (manual transmission only) is depressed.
Page 133 If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer. CAUTION ■...
Page 134 2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■...
Page 135 2-4. Using other driving systems When VSC and TRAC are operating If the vehicle is in danger of slip- ping or the front wheels (2WD), or 4 wheels (AWD) spin, the indi- cator flashes to indicate that VSC/TRAC have been engaged. To disable TRAC and/or VSC If the vehicle gets stuck in fresh snow or mud, TRAC and VSC may reduce power from the engine to the wheels.
Page 136 ■ When the “TRAC OFF” indicator light comes on even if the VSC off switch has not been pressed TRAC cannot be operated. Contact your Toyota dealer. ■ Automatic reactivation of TRAC and VSC Turning the engine switch OFF after turning off the TRAC and VSC systems will automatically re-enable them.
Page 137 2-4. Using other driving systems ■ If the slip indicator light comes on There is a malfunction in the TRAC and VSC systems. Contact your Toyota dealer and have your Toyota inspected. ■ EPS system operation sound When the steering wheel is operated, a motor sound (whirring sound) may be heard.
Page 138 The ABS and VSC systems will not function correctly if different tires are fit- ted on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause the system to malfunction.
Page 139 2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. ● Stow cargo and luggage in the luggage compartment whenever possible. Be sure all items are secured in place. ● Be careful to keep the vehicle level. Placing the weight as far for- ward as possible helps maintain vehicle balance.
Page 140 2-5. Driving information (6)If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. (→P. 167) Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle...
Page 141 2-5. Driving information As shown in the above example, if the number of occupants increases, the cargo and luggage load will be reduced by an amount that equals the increased weight due to the additional occupants. In other words, if an increase in the number of occupants causes an excess of the total load capacity (combined weight of occupants plus cargo and luggage load), you must reduce the cargo and luggage on your vehicle.
Page 142 2-5. Driving information CAUTION ■ Storage precautions Observe the following precautions. Failing to do so may result in death or serious injury. ● To prevent cargo and luggage from sliding forward during braking, do not stack anything in the luggage compartment. Keep cargo and lug- gage low, as close to the floor as possible.
Page 143 150 lb. (68 kg) per person. ■ Trailer weight rating 1.8 L 4-cylinder (2ZR-FE) engine Toyota does not recommend towing a trailer with your vehicle. 2.4 L 4-cylinder (2AZ-FE) engine →P. 171, 438 ■ Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occupants.
Page 144 2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 145 2-5. Driving information ■ When driving the vehicle Accelerate the vehicle slowly and drive at a reduced speed suit- able to road conditions. ■ When parking the vehicle Park the vehicle and move the shift lever to P (automatic trans- mission), 1 or R (manual transmission) without setting the park- ing brake.
Page 146 2-5. Driving information ■ Snow chain installation (vehicles with 16-inch and 17-inch tires) Observe the following precautions when installing and removing chains. ● Install and remove tire chains in a safe location. ● Install tire chains on the front tires only. Do not install tire chains on rear tires.
Page 147 NOTICE ■ Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota dealers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valves and transmitters.
Page 148 Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicycle, etc. Your Toyota is not designed for trailer towing or for the use of tow hitch mounted carriers.
Page 149 To tow a trailer safely, use extreme care and drive the vehicle in accordance with your trailer’s characteristics and operating condi- tions. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Contact your Toyota dealer for further information about additional requirements such as towing kits, etc.
Page 150 2-5. Driving information ■ GVWR (Gross Vehicle Weight Rating) The maximum allowable gross vehicle weight. The gross vehicle weight is the total weight of the vehicle. When towing a trailer, it is the sum of the vehicle weight (including the occupants, cargo and any optional equipment installed on the vehicle) and the tongue weight.
Page 151 2-5. Driving information ■ TWR (Trailer Weight Rating) The maximum allowable gross (With brakes) trailer weight. The gross trailer weight is the sum of the trailer weight and the weight of the cargo in the trailer. TWR is calculated assuming base vehicle with one driver, one front passenger, towing package (if available), hitch and hitch sys-...
Page 152 2-5. Driving information ■ Tongue Weight The load placed on the trailer hitch ball. (→P. 171) Weight limits ● The gross trailer weight must never exceed the TWR described in the table. (→P. 171) ● The gross combination weight must never exceed the GCWR described in the table.
Page 153 2-5. Driving information GCWR, TWR and Unbraked TWR Confirm that the gross trailer weight, gross combination weight, gross vehicle weight, gross axle weight and tongue weight are all within the limits. ■ GCWR and TWR Driving system Grade Transmission GCWR Automatic 4975 lb.
Page 154 Toyota hitch/bracket for your vehicle. For details, contact your Toyota dealer. ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross trailer weight require- ment of your vehicle.
Page 155 ● Speed limits for towing a trailer vary by state or province. Do not exceed the posted towing speed limit. ● Toyota recommends that the vehicle-trailer speed limit is 65 mph (104 km/h) on a flat, straight, dry road. Do not exceed this limit, the posted towing speed limit or the speed limit for your trailer as set forth in your trailer owner’s manual, whichever is lowest.
Page 156 2-5. Driving information ● Practice turning, stopping and reversing with the trailer attached in an area away from traffic until you become accustomed to the feel of the vehicle-trailer combination. ● Reversing with a trailer attached is difficult and requires practice. Grip the bottom of the steering wheel and move your hand to the left to move the trailer to the left.
Page 157 2-5. Driving information ● Automatic transmission: To maintain engine braking efficiency and charging system perfor- mance when using engine braking, do not put the transmission in “D”. If in the S mode, the transmission shift gear position must be in 4 or lower.
Page 158 2-5. Driving information STEP Apply the parking brake firmly. STEP Shift into 1 or R (manual transmission) or P (automatic trans- mission) and turn off the engine. ● When restarting after parking on a slope: STEP With the transmission in P (automatic transmission) or the clutch pedal (manual transmission) depressed, start the engine.
Page 159 Break-in schedule If your vehicle is new or equipped with any new power train components (such as an engine, transmission, differential or wheel bearing), Toyota rec- ommends that you do not tow a trailer until the vehicle has been driven for over 500 miles (800 km).
Page 160 2-5. Driving information ■ If trailer sway occurs One or more factors (crosswinds, passing vehicles, rough roads, etc.) can adversely affect handling of your vehicle and trailer, causing instability. ● If trailer swaying occurs: • Firmly grip the steering wheel. Steer straight ahead. Do not try to control trailer swaying by turning the steering wheel.
Page 161 2-5. Driving information CAUTION ■ To avoid accident or injury ● Do not exceed the TWR, unbraked TWR, GCWR, GVWR or GAWR. ● Adjust the tongue weight within the appropriate range. Place heavier loads as close to the trailer axle as possible. ●...
Page 162 NOTICE ■ When installing a trailer hitch Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. ■ Do not directly splice trailer lights Do not directly splice trailer lights.
Page 163 2-5. Driving information Dinghy towing (automatic transmission) Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with 4 wheels on the ground.
Page 164 2-5. Driving information Dinghy towing (manual transmission) Your vehicle can be dinghy towed in a forward direction (with 4 wheels on the ground) behind a motor home. Towing your vehicle with 4 wheels on the ground To prevent damage to your vehicle, perform the following procedures before towing.
Page 165 2-5. Driving information NOTICE ■ Dinghy towing direction Do not tow the vehicle backwards. Doing so may cause serious damage. ■ To prevent the steering from locking Ensure the engine switch is in the “ACC” position.
Page 166 3-1. Using the air conditioning system and defogger Air conditioning system Heater Air outlet selection dial Temperature control dial Fan speed control dial Air intake mode switch Air conditioning system Air outlet selection dial Temperature control dial Fan speed control dial Air intake mode switch Air conditioning ON/OFF switch...
Page 167 3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting (heater) Turn the temperature control dial clockwise to increase the temper- ature. ■ Adjusting the temperature setting (air conditioning system) Turn the temperature control dial clockwise (warm) or counter- clockwise (cool).
Page 168 3-1. Using the air conditioning system and defogger Air flows to the upper body and feet. : Some models Mainly air flows to the feet. : Some models Air flows to the feet and the windshield defogger operates. The air intake is automatically switched to outside air mode.
Page 169 3-1. Using the air conditioning system and defogger Air flows to the windshield and side windows. The air intake is automatically switched to outside air mode. It is not possible to return to recircu- lated air mode when the switch is ■...
Page 170 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Adjusting the position Direct air flow to the left or right, up or down. Opening and closing Open the vent Close the vent...
Page 171 3-1. Using the air conditioning system and defogger ■ For quick cooling (vehicles with air conditioning system) Turn the temperature control dial to the “MAX A/C” position and select the recirculated air mode. ■ For quick clearing of the windshield and side windows (vehicles with air conditioning system) Press to turn the air conditioning on.
Page 172 3-1. Using the air conditioning system and defogger NOTICE ■ To prevent battery discharge Do not leave the air conditioning system on longer than necessary when the engine is stopped.
Page 173 3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers Clear the rear window using the defogger. On/off The defoggers will automati- cally turn off after approxi- mately 15 minutes. ■ Outside rear view mirror defogger (if equipped) Turning the rear window defogger on will turn the outside rear view mirror defoggers on.
Page 174 3-2. Using the audio system Audio system types Without Display Audio system Type A: CD player and AM/FM radio (with CD changer controller) Type B: CD player and AM/FM radio...
Page 175: Table Of Contents
3-2. Using the audio system Title Page Using the radio P. 203 Using the CD player P. 207 Playing MP3 and WMA discs P. 215 Operating an iPod P. 225 Operating a USB memory P. 234 Optimal use of the audio system P.
Page 176 3-2. Using the audio system ■ Using cellular phones Interference may be heard through the audio system's speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. ® ■ About Bluetooth The Bluetooth wordmark and logo are owned by Bluetooth SIG.
Page 177 3-2. Using the audio system CAUTION ■ For vehicles sold in U.S.A. and Canada (type A) ● Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment will void the user’s authority to operate this device. ●...
Page 178 3-2. Using the audio system CAUTION ■ U.S.A. (type B) FCC ID: ACJ932PTA184 FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Page 179 3-2. Using the audio system CAUTION ■ U.S.A. (with Display Audio system) FCC ID: ACJ932CQ-US70G0 FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Page 180 3-2. Using the audio system CAUTION ■ Canada (type B and Display Audio system) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
Page 181 3-2. Using the audio system CAUTION This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).
Page 182 3-2. Using the audio system NOTICE ■ To prevent battery discharge Do not leave the audio system on longer than necessary with the engine off. ■ To avoid damaging the audio system Take care not to spill drinks or other fluids over the audio system.
Page 183: Using The Radio
3-2. Using the audio system Using the radio Type A Power Volume Adjusting the frequency Station selector Seeking the AM/FM frequency mode buttons Scanning for receivable stations Type B Adjusting the Power Volume frequency or selecting items Station selector Seeking the frequency Scanning for AM/FM mode button...
Page 184 3-2. Using the audio system Setting station presets Type A ∧ STEP Search for desired stations by turning or pressing “ ” or “∨” on STEP Press and hold the button (from ) the station is to be set to until you hear a beep. Type B ∧...
Page 185 3-2. Using the audio system Switching the display Type A Press Each time is pressed, the display changes in the following order: Title (song/program title) → Name (artist name/feature)/Title (song/pro- gram title). Type B Press If the text continues past the end of the display, “ ”...
Page 186 3-2. Using the audio system NOTICE ■ To prevent damage, remove the antenna in the following cases. ● The antenna will touch the ceiling of a garage. ● A cover will be put on the roof.
Page 187: Using The Cd Player
3-2. Using the audio system Using the CD player Type A Power Volume Reverse Fast-forward CD eject Repeat play Displays text Selecting a track message Random playback Search playback Playback Type B Selecting a Power Volume CD eject Random playback track or displays track list Reverse...
Page 188 3-2. Using the audio system Loading CDs Insert a CD. Ejecting CDs Press and remove the CD. Selecting a track Type A ∧ Press “ ” to move up or “∨” to move down using until the desired track number is displayed. Type B ∧...
Page 189 3-2. Using the audio system Selecting a track from a track list (type B) STEP Press The track list will be displayed. STEP Turn and press to select a track. To return to the previous display, press (BACK). Scanning tracks Type A STEP Press...
Page 190 3-2. Using the audio system Repeat play Type A ■ Repeating a track Press (RPT). To cancel, press the button once more (without a CD changer), or twice more (with a CD changer). ■ Repeating all of the tracks on a CD (with a CD changer) Press and hold (RPT) until you hear a beep.
Page 191 3-2. Using the audio system Switching the display Type A Press Each time is pressed, the display changes in the following order: Track no./Elapsed time → CD title → Track name. Type B Press Track title, Artist name and Disc title are shown on the display. To return to the previous display, press (BACK).
Page 192 “WAIT” or “PLEASE WAIT”: Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played back. ■ Discs that can be used Discs with the marks shown below can be used.
Page 193 3-2. Using the audio system NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual Disc. Doing so may damage the CD player and/or the CD insert/eject function. ●...
Page 194 3-2. Using the audio system NOTICE ■ CD player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ●...
Page 195: Playing Mp3 And Wma Discs
3-2. Using the audio system Playing MP3 and WMA discs Type A Power Volume Fast-forward Selecting a file Reverse Disc eject Selecting a file Selecting a folder Playback Repeat play Search playback Displays text message Random playback Type B Selecting a file Power Volume Disc eject...
Page 196 3-2. Using the audio system Loading and ejecting MP3 and WMA discs →P. 208 Selecting MP3 and WMA discs (with a CD changer) (type A) →P. 209 Selecting and scanning a folder Type A ■ Selecting folders one at a time Press “∧”...
Page 197 3-2. Using the audio system Type B ■ Selecting folders one at a time Press ) or ) to select the desired folder. ■ Selecting a folder and file from a folder list STEP Press The folder list will be displayed. STEP Turn and press to select a folder and a file.
Page 198 3-2. Using the audio system Fast-forwarding and reversing files →P. 208 Repeat play ■ Repeating a file (type A) Press (RPT). To cancel, press the button once more (without a CD changer), or twice more (with a CD changer). ■ Repeating all of the files in a folder Type A Press and hold...
Page 199 3-2. Using the audio system Random playback Type A ■ Playing files from a particular folder in random order Press (RAND). To cancel, press the button once more (without a CD changer), or twice more (with a CD changer). ■ Playing all of the files on a disc in random order Press and hold (RAND) until you hear a beep.
Page 200 “WAIT” or “PLEASE WAIT” (type A): Operation has stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played. “ERROR” (type B): This indicates a problem either in the CD or inside the player.
Page 201 3-2. Using the audio system ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 202 3-2. Using the audio system ● Compatible media Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.
Page 203 3-2. Using the audio system ● ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver.
Page 204 3-2. Using the audio system NOTICE ■ CDs that cannot be used (→P. 213) ■ CD player precautions (→P. 214)
Page 205: Operating An Ipod
3-2. Using the audio system ∗ Operating an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. ■ Connecting an iPod Open the cover and connect STEP an iPod using an iPod cable. Turn on the power of the iPod if it is not turned on.
Page 206 3-2. Using the audio system ■ Control panel Adjusting sound quality and volume balance Power Volume Shuffle playback Selecting an iPod Repeat play iPod menu menu/song or mode Reverse displays song list Fast-forward Selecting a track Playback Displays text message...
Page 207 3-2. Using the audio system Selecting a play mode STEP Press (MENU) to select iPod menu mode. STEP Turning clockwise changes the play mode in the fol- lowing order: “Playlists”→“Artists”→“Albums”→“Songs”→“Podcasts”→“Genres” →“Composers”→“Audiobooks” STEP Press to select the desired play mode. ■ Play mode list First Second...
Page 208 3-2. Using the audio system ■ Selecting a list STEP Turn to display the first selection list. STEP Press to select the desired item. Pressing the knob changes to the second selection list. STEP Repeat the same procedure to select the desired item. To return to the previous selection list, press (BACK).
Page 209 3-2. Using the audio system Fast-forwarding and reversing songs To fast-forward or reverse, press ) or Shuffle playback Pressing (RDM) changes modes in the following order: Track shuffle → Album shuffle → Off Repeat play Press (RPT) To cancel, press (RPT) again.
Page 210 3-2. Using the audio system ■ About iPod ● “Made for iPod” and “Made for iPhone” mean that an electronic acces- sory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple per- formance standards.
Page 211 3-2. Using the audio system ■ iPod problems To resolve most problems encountered when using your iPod, disconnect your iPod from the vehicle iPod connection and reset it. For instructions on how to reset your iPod, refer to your iPod Owner's Man- ual.
Page 212 3-2. Using the audio system ■ Compatible models ® ® ® ® ® The following iPod , iPod nano , iPod classic , iPod touch and iPhone devices can be used with this system. ● Made for • iPod touch (4th generation) •...
Page 213 3-2. Using the audio system NOTICE ■ To prevent damage to iPod ● Do not leave the iPod in the vehicle. The temperature inside may become high, resulting in damage to the player. ● Do not push down on or apply unnecessary pressure to the iPod while it is connected as this may damage the iPod or its terminal.
Page 214: Operating A Usb Memory
3-2. Using the audio system ∗ Operating a USB memory Connecting a USB memory enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory Open the cover and connect a STEP USB memory. Turn on the power of the USB memory if it is not turned on.
Page 215 3-2. Using the audio system ■ Control panel Power Volume Random playback Selecting a file Repeat play or displays folder list Selecting a track Playback Search playback Selecting a folder, fast-forwarding and rewinding Displays text message...
Page 216 3-2. Using the audio system Selecting a folder ■ Selecting folders one at a time To select the desired folder, press ) or ■ Selecting a folder and file from a folder list STEP Press The folder list will be displayed. STEP Turn and press to select a folder and a file.
Page 217 3-2. Using the audio system Scanning files STEP Press The first 10 seconds of all files in the folder will be played. STEP When the desired file is reached, press again. Fast-forwarding and reversing files →P. 229 Random playback Pressing (RDM) changes modes in the following order: Folder random →...
Page 218 3-2. Using the audio system ■ USB memory functions ● Depending on the USB memory that is connected to the system, the device itself may not be operable and certain functions may not be avail- able. If the device is inoperable or a function is unavailable due to a mal- function (as opposed to a system specification), disconnecting the device and reconnecting it once again may resolve the problem.
Page 219 3-2. Using the audio system ● MP3 and WMA files MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 220 3-2. Using the audio system ● ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3 tags.
Page 221 3-2. Using the audio system NOTICE ■ To prevent damage to a USB memory ● Do not leave a USB memory in the vehicle. The temperature inside may become high, resulting in damage to the player. ● Do not push down on or apply unnecessary pressure to the USB memory while it is connected as this may damage the USB memory or its terminal.
Page 222: Optimal Use Of The Audio System
3-2. Using the audio system Optimal use of the audio system Type A Adjusting the sound quality and ASL Type B Menu button Adjusting the sound quality and ASL...
Page 223 3-2. Using the audio system Using the audio control function ■ Changing sound quality modes Type A Pressing selects the mode to be changed in the following order. “BAS”→“TRE”→“FAD”→“BAL”→“ASL” Type B STEP Press STEP Turn to select “Sound Setting”. STEP Press STEP Turn...
Page 224 3-2. Using the audio system ■ Adjusting sound quality Turning adjusts the level. Type A Mode Sound qual- Turn to the Turn to the Level displayed ity mode left right “BAS” Bass* -5 to 5 High “TRE” Treble* -5 to 5 Front/rear Shifts to “FAD”...
Page 225 3-2. Using the audio system Type B Mode Sound qual- Turn to the Turn to the Level displayed ity mode left right “BASS” Bass* -5 to 5 High “TREBLE” Treble* -5 to 5 Front/rear Shifts to “FADER” volume F7 to R7 Shifts to rear front balance...
Page 226: Using The Aux Port
3-2. Using the audio system Using the AUX port This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers. Type A Open the cover and connect STEP the portable audio device. Press STEP Type B...
Page 227 3-2. Using the audio system Press STEP ■ Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio device itself. ■ When using a portable audio device connected to the power outlet Noise may occur during playback.
Page 228: Using The Steering Wheel Audio Switches
3-2. Using the audio system Using the steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Volume Radio mode: Selects radio stations CD mode: Selects tracks, files (MP3 and WMA) and discs iPod mode: Selects songs USB memory mode: Selects files and fold-...
Page 229 3-2. Using the audio system Changing the audio source Press when the audio system is turned on. The audio source changes each time is pressed. If a mode cannot be used, it will be skipped. Adjusting the volume Press “+” on to increase the volume and “-”...
Page 230 3-2. Using the audio system Selecting a track/file or song ® STEP Press to select CD, iPod, USB memory or Bluetooth audio mode. STEP Press “∧” or “∨” on to select the desired track/file or song. Selecting a folder or album ®...
Page 231 ® 3-3. Using the Bluetooth audio system ® ∗ Bluetooth audio/phone ® ■ Bluetooth audio ® The Bluetooth audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehi- cle speakers via wireless communication. ®...
Page 232 ® 3-3. Using the Bluetooth audio system ■ When transferring ownership of the vehicle Be sure to initialize the system to prevent personal data from being improp- erly accessed. (→P. 272) ® ■ About Bluetooth Bluetooth is a registered trademark of Bluetooth SIG.
Page 233 ® 3-3. Using the Bluetooth audio system NOTICE ® ■ To prevent damage to Bluetooth device ® Do not leave Bluetooth device in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the device.
Page 234 ® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio/phone ■ Audio unit ® Bluetooth connection con- dition If “BT” is not displayed, the ® Bluetooth audio/phone cannot be used. Display A message, name, number, etc. is displayed. Lower-case characters and special characters cannot be displayed.
Page 235 ® 3-3. Using the Bluetooth audio system ■ Steering wheel switches →P. 248 ■ Microphone Vehicles with moon roof Vehicles without moon roof...
Page 236 ® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio/phone for the first time ® Before using the Bluetooth audio/phone, it is necessary to register a ® Bluetooth device in the system. Follow the procedure below to reg- ister (pair) a device: STEP Press...
Page 237 ® 3-3. Using the Bluetooth audio system ® Menu list of the Bluetooth audio/phone First menu Second menu Third menu Operation details Registering a “BT Pairing” ® Bluetooth device Listing the registered “List Phone” cellular phones Listing the registered “List Audio” portable players “Passkey”...
Page 238 ® 3-3. Using the Bluetooth audio system First menu Second menu Third menu Operation details “Add contacts” Adding a new number Registering a speed “Add SD” dial “Delete Call Deleting a number History” stored in the call history “Phonebook” Deleting a number “Delete stored in the contacts”...
Page 239 ® 3-3. Using the Bluetooth audio system ® Operating a Bluetooth enabled portable player Power Volume Selecting an album, fast-forwarding and rewinding Repeat play Random playback Selecting items Selecting a track Playback Search playback Playback/Pause Displays text message Selecting an album Press ) or ) to select the desired album.
Page 240 ® 3-3. Using the Bluetooth audio system Scanning tracks STEP Press The first 10 seconds of all tracks in the album will be played. STEP When the desired track is reached, press again. Playing and pausing tracks Press ) to play or pause a track. Fast-forwarding and reversing tracks →P.
Page 241 ® 3-3. Using the Bluetooth audio system ® ■ Bluetooth audio system functions Depending on the portable player that is connected to the system, certain functions may not be available.
Page 242 3-4. Using the hands-free phone system (for cellular phone) Making a phone call To enter the “PHONE” mode, press the off-hook switch. ■ Making a phone call ● Dialing by selecting a name ● Speed dialing ● Dialing by entering the number ●...
Page 243 3-4. Using the hands-free phone system (for cellular phone) Dialing by selecting a name STEP Select “Phonebook” using STEP Select the desired name using and press the off-hook switch. By pressing (Add S. Dial) and one of the speed dial buttons (from ) while the desired name is selected, it can be registered as a speed dial.
Page 244 3-4. Using the hands-free phone system (for cellular phone) Dialing from call histories STEP Select “All calls”, “Missed calls”, “Incoming calls” or “Outgoing calls” using STEP Select a desired number using and press the off-hook switch. The following operations can be performed: ●...
Page 245 3-4. Using the hands-free phone system (for cellular phone) Operations during a call ● Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the fol- lowing methods: a.
Page 246 3-4. Using the hands-free phone system (for cellular phone) Adjusting the ringtone volume when receiving a call Change the ringtone volume using To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. ■ When talking on the phone ●...
Page 247 3-4. Using the hands-free phone system (for cellular phone) Using the “SET UP” menu (“Bluetooth” menu) ® Registering a Bluetooth device in the system allows the system to function. The following functions can be used for registered devices: ■ Functions and operation procedures STEP Press and select “Bluetooth”...
Page 248 3-4. Using the hands-free phone system (for cellular phone) Registering a portable player Select “Pairing” using , and perform the procedure for regis- tering a portable player. (→P. 256) Listing the registered cellular phones Select “List Phone” using . The list of registered cellular phones will be displayed.
Page 249 3-4. Using the hands-free phone system (for cellular phone) Listing the registered portable players Select “List Audio” using . The list of registered portable play- ers will be displayed. ● Connecting the registered portable player to the audio system STEP Select the name of the portable player to be connected using STEP...
Page 250 3-4. Using the hands-free phone system (for cellular phone) Changing the passkey STEP Select “Passkey” using STEP Select a 4 to 8-digit passkey using Input the number 1 digit at a time. STEP When the entire number to be registered as a passkey has been input, press again.
Page 251 3-4. Using the hands-free phone system (for cellular phone) Displaying the device status Select “Bluetooth info” using ● Displaying the device name Select “Device Name” using ● Displaying the device address Select “Device Address” using Setting the automatic connection confirmation display to on or off If the “Display Setting”...
Page 252 3-4. Using the hands-free phone system (for cellular phone) Initialization Select “Initialize” using ● Initializing the sound settings Select “Sound setting” using and press (YES). For details about sound settings (→P. 242) ● Initializing the device information Select “Car Device Info” using and press (YES).
Page 253 3-4. Using the hands-free phone system (for cellular phone) Using the “SET UP” menu (“Phone” menu) ■ Functions and operation procedures To enter the menu of each function, press and follow the steps below using ● Adding a new phone number 1.
Page 254 3-4. Using the hands-free phone system (for cellular phone) Adding a new phone number Select “Add contacts” using ● Transferring all contacts from the cellular phone Select “Overwrite all contacts” using and press (YES). ● Transferring one contact from the cellular phone Select “Add one contact”...
Page 255 3-4. Using the hands-free phone system (for cellular phone) Deleting call histories Select “Delete Call History” using ● Deleting outgoing call history STEP Select “Outgoing Calls” using STEP Select the desired phone number using and press (YES). To delete all outgoing call history data, press (ALL) and then press (YES).
Page 256 3-4. Using the hands-free phone system (for cellular phone) ● Deleting missed call history STEP Select “Missed Calls” using STEP Select the desired phone number using and press (YES). To delete all missed call history data, press (ALL) and then press (YES).
Page 257 3-4. Using the hands-free phone system (for cellular phone) Deleting a registered phone number STEP Select “Delete contacts” using STEP Select the desired phone number using and press (YES). To delete all of the registered phone numbers, select “All delete” using and press (YES).
Page 258 3-4. Using the hands-free phone system (for cellular phone) Setting ringtone volume STEP Select “Ringtone Volume” using STEP Change the ringtone volume. To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Setting ringtone STEP Select “Ringtone” using STEP Using , select a ringtone (1 - 3).
Page 259 3-5. Using the interior lights Interior lights list Personal/interior lights or personal lights (→P. 281, 282) Interior lights (→P. 280)
Page 260 “DOOR” position, the lights will go off automatically after 20 minutes. ■ Customization that can be configured at Toyota dealer Settings (e.g. The time elapsed before lights turn off) can be changed. (Customizable features →P. 469) Interior light “DOOR”...
Page 261 3-5. Using the interior lights Personal/interior lights Personal/interior lights (vehicles with moon roof) ■ Interior lights “DOOR” position ■ Personal lights On/off...
Page 262 3-5. Using the interior lights Personal lights Personal lights (vehicles without moon roof) On/off...
Page 263 3-6. Using the storage features List of storage features Auxiliary boxes Glove box Bottle holders Cup holders Console box CAUTION ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ●...
Page 264 3-6. Using the storage features Glove box and console box Glove box Pull up the lever. CAUTION ■ Caution while driving Keep the glove box closed. In the event of sudden braking or sudden swerv- ing, an accident may occur due to an occupant being struck by the open glove box or the items stored inside.
Page 265 3-6. Using the storage features Cup holders Cup holders Front Rear Pull the lid to open. ■ Using the cup holder (front) to store small items Remove the cup holder inserts.
Page 266 3-6. Using the storage features Cup holders ■ Adjusting the cup holder to the size of the cups or drink-cans Remove the cup holder insert and change the cup holder insert position. Small size Middle size Large size ■ Cup holder inserts (front) The cup holder inserts may be removed for cleaning.
Page 267 3-6. Using the storage features Bottle holders Bottle holders Front Rear CAUTION ■ Items unsuitable for the bottle holder Do not place anything other than pet bottles in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 268 3-6. Using the storage features Bottle holders and auxiliary boxes NOTICE ■ When a pet bottle is in the front bottle holder (vehicles with manual window) As there is a possibility of interfering with a manual window regulator handle, pre- vent the window from opening and clos- ing, do not place a pet bottle in the holder when turning the handle.
Page 269 3-6. Using the storage features Auxiliary boxes CAUTION ■ Caution while driving Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking. ■ Items unsuitable for storing (overhead console only) Do not store items heavier than 0.4 lb. (0.2 kg). Doing so may cause the auxiliary box to open and the items inside may fall out, resulting in an accident.
Page 270 3-7. Other interior features Sun visors Forward position: Flip down. Side position: Flip down, unhook, and swing to the side.
Page 271 3-7. Other interior features Vanity mirrors Slide the cover.
Page 272 3-7. Other interior features Clock Adjusts the hour. Adjusts the minutes. Rounds nearest hour.* *: e.g. 1:00 to 1:29 → 1:00 1:30 to 1:59 → 2:00 ■ The clock is displayed when The engine switch is in the “ACC” or “ON” position.
Page 273 3-7. Other interior features ∗ Ashtrays An ashtray can be installed in a cup holder. CAUTION ■ When not in use Keep the ashtray closed. Injuries may result in the event of sudden braking, sudden swerving or an accident. ■ To prevent fire ●...
Page 274 3-7. Other interior features ∗ Cigarette lighter Push cigarette lighter down. The cigarette lighter will pop up when it is ready for use. ■ The cigarette lighter can be used when The engine switch is in the “ACC” or “ON” position. CAUTION ■...
Page 275 3-7. Other interior features ∗ Power outlet The power outlet can be used for a following component. 12 V: Accessories that run on less than 10 A. 115 V: Accessories that uses less than 100 W. Type A (12 V) Type B (115 V) ■...
Page 276 3-7. Other interior features NOTICE ■ To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit. ■...
Page 277 3-7. Other interior features Grocery bag hook This hook is designed to hang things like grocery bag. Cabin Press the hook. Luggage compartment...
Page 278 3-7. Other interior features NOTICE ■ Grocery bag hook weight capacity Cabin Do not hang any object heavier than 44 lb. (20 kg) on the grocery bag hook. Luggage compartment Do not hang any object heavier than 7 lb. (3 kg) on the grocery bag hooks.
Page 279 3-7. Other interior features ∗ Seatback table Front passenger's seatback can be used as a temporary table only when the vehicle is stopped. Fold down the front passen- ger's seat to use the seatback table. (→P. 40) CAUTION ■ Caution while driving Observe the following precautions to avoid death or serious injury.
Page 280 3-7. Other interior features Assist grips An assist grip installed on the ceiling can be used to support your body while sitting on the seat. CAUTION ■ Assist grip Do not use the assist grip when getting in or out of the vehicle or rising from your seat.
Page 281 When installing the driver's floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver's seat. ●...
Page 282 3-7. Other interior features Luggage compartment feature ■ Cargo hooks Cargo hooks are provided for securing loose items. ■ Tie-down belts To tighten To loosen To hook To unhook...
Page 283 3-7. Other interior features ■ Auxiliary boxes Turn knobs “UNLOCK” position, remove the deck boards.
Page 284 3-7. Other interior features ■ Grocery bag hooks (→P. 297) ■ Tonneau cover (if equipped) Remove the deck board. STEP Take out the bag. STEP Remove the tonneau cover STEP from the bag.
Page 285 3-7. Other interior features Slowly unfold the tonneau STEP cover. Attach the hook to the hook STEP brackets. Raise the rear center head STEP restraint to attach the hook.
Page 286 3-7. Other interior features Folding the tonneau cover Hold the tonneau cover with both STEP hands. Point your thumbs in opposite directions. Bend one side of the cover STEP towards you. Twist the other side in the oppo- STEP site direction, as shown in the illustration.
Page 287 3-7. Other interior features Make a small circle, then fold it STEP inward. Make sure the three circles are STEP side by side. Put it in the bag. STEP...
Page 288 3-7. Other interior features CAUTION ■ When unfolding the tonneau cover Be careful not to hit yourself when unfolding the tonneau cover. ■ Caution while driving Keep the deck boards locked. Injuries may result in the event of an accident or sudden braking.
Page 289 3-7. Other interior features ∗ Compass The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. ■ Operation To turn the compass on or off, press and hold “AUTO” for 3 seconds. ■ Displays and directions Display Direction...
Page 290 3-7. Other interior features Calibrating the compass The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in the illustration, the compass will deviate.
Page 291 3-7. Other interior features ■ Circling calibration STEP Stop the vehicle in a place where it is safe to drive in a circle. Press and hold “AUTO” for 9 STEP seconds. C appears on the compass dis- play. Drive the vehicle at 5 mph (8 STEP km/h) or less in a circle until a direction is displayed.
Page 292 3-7. Other interior features CAUTION ■ While driving the vehicle Do not adjust the display. Be sure to adjust the display only when the vehicle is stopped. ■ When doing the circling calibration Be sure to secure a wide space, and watch out for people and vehicles in the neighborhood.
Page 293 4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 294 4-1. Maintenance and care ■ Aluminum wheels ● Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint. ●...
Page 295 ■ If the windshield washer nozzle become blocked Contact your Toyota dealer. Do not try to clear it with a pin or other object. This may damage the nozzle. ■ Cleaning the exterior lights ●...
Page 296 4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 297 4-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle's interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 298 4-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use organic substances such as benzene or gasoline, acidic or alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. ●...
Page 299 It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 300 Continue to press and hold the button until the trip meter displays 000000. ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.
Page 301 Booklet” “Owner’s Manual Supplement/Scheduled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items Check points Check the connections. Battery (→P.
Page 302 4-2. Maintenance Vehicle interior Items Check points • Moves smoothly (without uneven Accelerator pedal pedal effort or catching)? • Can the vehicle be held securely Automatic transmission “Park” on an incline with the shift lever in mechanism • Moves smoothly? •...
Page 303 4-2. Maintenance Vehicle exterior Items Check points Doors • Operate smoothly? Engine hood • The lock system works properly? • Is there any leakage after park- Fluid leaks ing? • Inflation pressure is correct? • Tire surfaces not worn or dam- aged? Tires •...
Page 304 If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. ■...
Page 305 Brake fluid level (→P. 343) • Rag or paper towel • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology.
Page 306 4-3. Do-it-yourself maintenance Items Parts and tools • Fuse with same amperage rating Fuses (→P. 369) as original Radiator and condenser ⎯ (→P. 342) • Tire pressure gauge Tire inflation pressure (→P. 358) • Compressed air source • Water washer fluid containing Washer fluid (→P.
Page 307 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing, and tools away from the moving fan and engine drive belt.
Page 308 4-3. Do-it-yourself maintenance NOTICE ■ If you remove the air cleaner Driving with the air cleaner removed may cause excessive engine wear due to dirt in the air. Also, a backfire could cause a fire in the engine compart- ment.
Page 309 4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. STEP The hood will pop up slightly. Lift the auxiliary catch lever STEP and lift the hood. Hold the hood open by insert- STEP ing the supporting rod into the slot.
Page 310 4-3. Do-it-yourself maintenance CAUTION ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■...
Page 311 4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. ■ Front 1.8 L 4-cylinder (2ZR-FE) engine 2.4 L 4-cylinder (2AZ-FE) engine...
Page 312 4-3. Do-it-yourself maintenance ■ Rear 2WD models without 18-inch tires 2WD models with 18-inch tires AWD models...
Page 313 4-3. Do-it-yourself maintenance CAUTION ■ When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri- ous injury. ● Lift up the vehicle using a floor jack such as the one shown in the illustra- tion.
Page 314 4-3. Do-it-yourself maintenance Engine compartment 1.8 L 4-cylinder (2ZR-FE) engine Engine oil filler cap Battery (→P. 345) (→P. 339) Radiator (→P. 342) Engine oil level dipstick Electric cooling fan (→P. 337) Condenser (→P. 342) Brake fluid reservoir Engine coolant reservoir (→P.
Page 315 4-3. Do-it-yourself maintenance 2.4 L 4-cylinder (2AZ-FE) engine Engine coolant reservoir Fuse box (→P. 369) (→P. 341) Battery (→P. 345) Engine oil filler cap Radiator (→P. 342) (→P. 339) Electric cooling fans Engine oil level dipstick Condenser (→P. 342) (→P. 337) Washer fluid tank (→P.
Page 316 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil STEP Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 317 4-3. Do-it-yourself maintenance 1.8 L 4-cylinder (2ZR-FE) engine with flat dipstick Full 1.8 L 4-cylinder (2ZR-FE) engine with non-flat dipstick Measuring side Full 2.4 L 4-cylinder (2AZ-FE) engine Full...
Page 318 4-3. Do-it-yourself maintenance ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 319 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 320 If the coolant level drops within a short time after replenishing Visually check the radiator, hoses, coolant reservoir cap, radiator cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system. ■...
Page 321 Radiator and condenser Check the radiator and condenser and remove any foreign objects. If any of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Toyota dealer. CAUTION ■...
Page 322 4-3. Do-it-yourself maintenance Brake fluid ■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. Make sure to check the fluid type and prepare the necessary items. ■ Adding fluid Make sure to check the fluid type and prepare the necessary items. Fluid type FMVSS No.116 DOT 3 or SAE J1703 brake fluid Items...
Page 323 4-3. Do-it-yourself maintenance Disconnect claws STEP remove the service cover. Remove the reservoir cap. STEP STEP Add brake fluid slowly while checking the fluid level. ■ Brake fluid can absorb moisture from the air Excess moisture in the fluid can cause a dangerous loss of braking effi- ciency.
Page 324 4-3. Do-it-yourself maintenance NOTICE ■ If the fluid level is low or high It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is high. If the reservoir needs frequent refilling, it may indicate a serious problem.
Page 325 4-3. Do-it-yourself maintenance CAUTION ■ Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: ●...
Page 326 4-3. Do-it-yourself maintenance NOTICE ■ When recharging the battery Never recharge the battery while the engine is running. Also, be sure all accessories are turned off. Washer fluid For vehicles sold in U.S.A. If any washer does not work, the washer tank may be empty. Open the lid.
Page 327 4-3. Do-it-yourself maintenance CAUTION ■ When refilling the washer fluid Do not refill the washer fluid when the engine is hot or running, as the washer fluid contains alcohol and may catch fire if spilled on the engine etc. NOTICE ■...
Page 328 ■ The tire pressure warning system (if equipped) Your Toyota is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. (→P. 400) The compact spare tire is not equipped with the tire pressure...
Page 329 ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized. Have tire pressure warning valve and transmitter ID codes registered by your Toyota dealer . (→P. 352) Initializing the tire pressure warning system ■...
Page 330 4-3. Do-it-yourself maintenance ■ How to initialize the tire pressure warning system STEP Park the vehicle in a safe place and turn the engine switch OFF. While the vehicle is moving, initialization is not performed. STEP Adjust the tire inflation pressure to the specified cold tire infla- tion pressure level.
Page 331 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly.
Page 332 Initialization can be completed in a few minutes. However, in the follow- ing cases, the settings have not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. ●...
Page 333 4-3. Do-it-yourself maintenance ■ Tire types 1 Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.
Page 334 4-3. Do-it-yourself maintenance ■ Tire pressure warning system certification FCC ID: PAXPMV107J FCC ID: HYQ13BCX For vehicles sold in the U.S.A. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 335 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 336 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 337 4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis- played on the tire and loading information label. (→P. 451)
Page 338 4-3. Do-it-yourself maintenance ■ Inspection and adjustment procedure Tire valve Tire pressure gauge STEP Remove the tire valve cap. STEP Press the tip of the tire pressure gauge onto the tire valve. STEP Read the pressure using the graduations of the gauge. STEP If the tire inflation pressure is not at the recommended level adjust the pressure.
Page 339 Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent refilling, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 340 4-3. Do-it-yourself maintenance CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. ● Excessive wear ● Uneven wear ●...
Page 341 ● Bent wheels that have been straightened ■ Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
Page 342 4-3. Do-it-yourself maintenance ■ When replacing wheels The wheels of your Toyota, except for the compact spare tire, are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advanced warning in the event of a loss in tire inflation pressure.
Page 343 Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 344 4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. ■ Removal method STEP Turn the engine switch OFF. Open the glove box. Slide off STEP the damper. Push in each side of the glove STEP box to disconnect the claws.
Page 345 4-3. Do-it-yourself maintenance ■ Replacement method Remove the air conditioning filter and replace it with a new one. The “↑UP” marks shown on the filter should be pointing up. ■ Checking interval Replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required.
Page 346 4-3. Do-it-yourself maintenance Key battery (vehicles with wireless remote control) Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with a rag.) ●...
Page 347 The wireless remote control will not function properly. ● The operational range is reduced. ■ Use CR2025 lithium battery ● Batteries can be purchased at your Toyota dealer, jewelers, or camera stores. ● Replace only with the same or equivalent type recommended by your Toyota dealer. ●...
Page 348 4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. STEP Turn the engine switch OFF. STEP Open the fuse box cover. Engine compartment Push the tab in and lift the lid off.
Page 349 4-3. Do-it-yourself maintenance Take out the pullout tool. STEP Only type A fuse can be removed using the pullout tool. STEP For type A and B fuses: Remove the fuse. STEP Check if the fuse has blown. Type A Normal fuse Blown fuse Replace it with one of an appropriate amperage rating.
Page 350 4-3. Do-it-yourself maintenance Type C Normal fuse Blown fuse Contact your Toyota dealer. Type D Normal fuse Blown fuse Contact your Toyota dealer.
Page 351 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment Fuse Ampere Circuit CDS FAN 30 A Electric cooling fan(s) RDI FAN 40 A Electric cooling fan(s) Anti-lock brake system, vehicle sta- ABS NO. 3 30 A bility control system Anti-lock brake system, vehicle sta- ABS NO.
Page 352 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 60 A Electric power steering 50 A EFI MAIN, HORN, IG2 H-LP LH LO, H-LP RH LO, H-LP H-LP MAIN 50 A LH HI, H-LP RH HI EFI NO. 2 10 A Emission control system Multiport fuel injection system/ EFI NO.
Page 353 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Interior lights, personal light, clock, DOME 10 A wireless remote control SPARE 10 A Spare fuse SPARE 30 A Spare fuse SPARE 20 A Spare fuse 30 A No circuit MAYDAY 10 A No circuit Multiport fuel injection system/ EFI MAIN 20 A...
Page 354 4-3. Do-it-yourself maintenance ■ Under the driver’s side instrument panel Fuse Ampere Circuit Parking lights, tail lights, license plate lights, multiport fuel injection TAIL 10 A system/sequential multiport fuel injection system, instrument cluster lights PANEL 7.5 A Switch illumination FR DOOR 20 A Power windows, electric moon roof RL DOOR...
Page 355 4-3. Do-it-yourself maintenance Fuse Ampere Circuit SRS airbag system, multiport fuel injection system/sequential multi- 7.5 A port fuel injection system, front passenger occupant classification system METER 7.5 A Gauge and meters Air conditioning system, rear win- HTR-IG 10 A dow defogger, PTC heater WIPER 25 A Windshield wipers...
Page 356 Never use a fuse of a higher amperage rating than indicated, or use any other object in place of a fuse. ● Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix. This can cause extensive damage or even fire.
Page 357 You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 358 4-3. Do-it-yourself maintenance ■ Rear bulb locations Rear turn signal lights Back-up lights Stop/tail and rear side marker lights License plate lights...
Page 359 4-3. Do-it-yourself maintenance Replacing light bulbs ■ Headlight low beams Turn the bulb base counterclock- STEP wise. Unplug the bulb while depress- STEP ing the lock release. ■ Headlight high beams and daytime running lights Turn the bulb base counterclock- STEP wise.
Page 360 4-3. Do-it-yourself maintenance Unplug the bulb while depress- STEP ing the lock release. ■ Front fog lights (if equipped) Remove the fender liner bolts STEP and clip. Partly remove the fender liner. STEP Turn the bulb base counterclock- STEP wise.
Page 361 4-3. Do-it-yourself maintenance Unplug the bulb while depress- STEP ing the lock release. ■ Front turn signal/parking and front side marker lights Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP...
Page 362 4-3. Do-it-yourself maintenance ■ Stop/tail and rear side marker lights, rear turn signal lights and back-up lights STEP Open the back door. Left side Remove the cover. STEP Right side (type A) Remove the cover using the flat- STEP head screwdriver. To protect the cover, place a rag between the flathead screwdriver and the cover.
Page 363 4-3. Do-it-yourself maintenance Turn the bulb base counterclock- STEP wise. Rear turn signal light Back-up light Stop/tail and rear side marker light Remove the light bulb. STEP Rear turn signal light Back-up light Stop/tail and rear side marker light...
Page 364 Remove the light bulb. STEP ■ LED high mounted stoplight The high mounted stoplight consists of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
Page 365 4-3. Do-it-yourself maintenance ■ Condensation build-up on the inside of the lens Contact your Toyota dealer for more information in the following situations. Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. ● Large drops of water are built up on the inside of the lens.
Page 366 5-1. Essential information Emergency flashers Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the turn signal lights. To turn them off, press the switch once again. NOTICE ■ To prevent battery discharge Do not leave the emergency flashers on longer than necessary when the engine is not running.
Page 367 If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 368 5-1. Essential information Emergency towing If a tow truck is not available, in an emergency your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelet. This should only be attempted on hard surfaced roads for short distances at low speeds.
Page 369 5-1. Essential information Towing with a sling-type truck Do not tow with a sling-type truck to prevent body damage. Towing with a wheel-lift type truck From the front (2WD models) Release the parking brake. From the front (AWD models) Use a towing dolly under the rear wheels.
Page 370 5-1. Essential information From the rear Automatic transmission: Use a towing dolly under the front wheels. Manual transmission: We recom- mend to use a towing dolly under the front wheels. When not using a towing dolly, turn the engine switch to the “ACC”...
Page 371 5-1. Essential information CAUTION ■ Caution while towing ● Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing eyelet and the cables or chains. Always be cautious of the surroundings and other vehicles while towing. ●...
Page 372 5-1. Essential information NOTICE ■ To prevent body damage when towing with a sling-type truck Do not tow with a sling-type truck, either from the front or rear. ■ To prevent causing serious damage to the transmission and Active Torque Control 4WD system (AWD models) when towing using a wheel-lift type truck (vehicles with an automatic transmission) 2WD models: Never tow this vehicle from the rear with the front wheels on the...
Page 373 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 374 Inspect the ground under the vehicle. If you find that fuel has leaked on to the ground, the fuel system has been damaged and is in need of repair. Do not restart the engine. Have the vehi- cle checked and repaired by your Toyota dealer.
Page 375 Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys- tem. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Brake system warning light (warning buzzer)* •...
Page 376 Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Indicates a malfunction in: (U.S.A.)
Page 377 If it is, tighten it securely. The malfunction indicator lamp will go off after taking several driving trips. If the malfunction indicator lamp does not go off even after several trips, con- tact your Toyota dealer as soon as possible.
Page 378 5-2. Steps to take in an emergency CAUTION ■ When the electric power steering warning light comes on The steering wheel may become extremely heavy. If the steering wheel becomes heavier than usual when operating, firmly hold and operate it using more force than usual. Follow the correction procedures.
Page 379 • Natural causes (→P. 403) even if the tire inflation • Flat tire (→P. 408) pressure is adjusted, have the system checked by your Toyota dealer. When the light comes on after blinking for 1 minute: Have the system checked Malfunction in the tire by your Toyota dealer.
Page 380 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Maintenance required reminder light Indicates that mainte- nance is required accord- ing to the driven distance on the maintenance schedule.* Illuminates for about 3 sec- onds and then flashes for about 15 seconds approxi- If necessary, perform main- mately 4500 miles (7200...
Page 381 5-2. Steps to take in an emergency ■ SRS warning light This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sen- sors, driver's seat position sensor, driver's seat belt buckle switch, front pas- senger occupant classification system (ECU and sensors), “AIR BAG ON”...
Page 382 If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. ● If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) ●...
Page 383 Check the tires. If the tire is flat, change to the spare tire and have the flat tire repaired by the nearest Toyota dealer. ● Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate, you could lose control of the steering wheel or the brakes.
Page 384 5-2. Steps to take in an emergency CAUTION As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS-tire pressure warning system) that illuminates a low tire pressure telltale (tire pressure warning light) when one or more of your tires is significantly under-inflated.
Page 385 5-2. Steps to take in an emergency NOTICE ■ Precaution when installing a different tire When a tire of a different specification or maker is installed, the tire pres- sure warning system may not operate properly.
Page 386 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ●...
Page 387 5-2. Steps to take in an emergency Taking out the jack Turn the knobs to the “UNLOCK” STEP position and remove the deck board. Detach the hook. STEP...
Page 388 5-2. Steps to take in an emergency Taking out the spare tire Turn the knobs to the “UNLOCK” STEP position and remove the deck boards. Loosen the center fastener that STEP secures the spare tire.
Page 389 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. STEP Wheel Flat tire chock posi- tions Behind the Left- rear right- hand hand side side tire Front Behind the Right- rear left- hand hand side side tire In front of...
Page 390 5-2. Steps to take in an emergency Slightly loosen the wheel nuts STEP (one turn). Turn the tire jack portion “A” by STEP hand until the notch of the jack is in contact with the jack point. The jack point guides are located under the rocker panel.
Page 391 5-2. Steps to take in an emergency Raise the vehicle until the tire is STEP slightly raised off the ground. Remove all the wheel nuts and STEP the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.
Page 392 5-2. Steps to take in an emergency Installing the tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle.
Page 393 5-2. Steps to take in an emergency Lower the vehicle. STEP Firmly tighten each nut two or STEP three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) STEP Stow the flat tire, tire jack and all tools. Stowing the flat tire Vehicles with aluminum wheel: STEP...
Page 394 5-2. Steps to take in an emergency Put the flat tire on the deck STEP boards with the outer side of the wheel facing up. Hook the belt clips closest to the buckles onto the front cargo hooks. Pass the belts through the center STEP hole of the wheel.
Page 395 5-2. Steps to take in an emergency Pull the ends of the belts to STEP secure the tire. ■ The compact spare tire ● The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall. Use the compact spare tire temporarily only in an emergency.
Page 396 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
Page 397 5-2. Steps to take in an emergency CAUTION ■ Replacing a flat tire ● Do not attach a heavily damaged wheel ornament, as it may fly off the wheel while the vehicle is moving and possibly result in serious injury. ●...
Page 398 5-2. Steps to take in an emergency CAUTION ■ When the spare tire is attached The vehicle speed may not be correctly detected, and the following sys- tems may not operate correctly: ● ABS & Brake assist ● ● TRAC Also, not only can the following system not be utilized fully, it may actu- ally negatively effect the drive-train components: ●...
Page 399 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and...
Page 400 One of the following may be the cause of the problem. ● One or both of the battery terminals may be disconnected. ● The battery may be discharged. (→P. 425) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown.
Page 401 (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 402 5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. Bring a mas- ter key and the key number stamped on the key number plate.
Page 403 You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your Toyota following the steps below. 1.8 L 4-cylinder (2ZR-FE) engine Remove the engine cover.
Page 404 STEP Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible.
Page 405 STEP Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible.
Page 406 5-2. Steps to take in an emergency ■ Avoiding a discharged battery ● Turn off the headlights and the audio system while the engine is turned off. ● Turn off any unnecessary electrical components when the vehicle is run- ning at a low speed for an extended period, such as in heavy traffic, etc. ■...
Page 407 5-2. Steps to take in an emergency CAUTION ■ Battery precautions The battery contains poisonous and corrosive acidic electrolyte, while related parts contain lead and lead compounds. Observe the following pre- cautions when handling the battery. ● When working with the battery, always wear safety glasses and take care not to allow any battery fluids (acid) to come into contact with skin, clothing or the vehicle body.
Page 408 Wait until the temperature of the engine (shown on the instrument cluster) begins to fall and then stop the engine. If the fans are not operating: Stop the engine and call your Toyota dealer. After the engine has cooled STEP STEP...
Page 409 Water can be used in an emer- gency if engine coolant is (→ unavailable. P. 445 Have the vehicle checked at the nearest Toyota dealer as soon as possible. ■ Overheating If you observe the following, your vehicle may be overheating.
Page 410 5-2. Steps to take in an emergency NOTICE ■ When adding engine coolant Wait until the engine has cooled down before adding engine coolant. When adding coolant, do so slowly. Adding cool coolant to a hot engine too quickly can cause damage to the engine.
Page 411 5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. STEP Stop the engine. Set the parking brake and put the shift lever in P (automatic transmission) or N (manual transmis- sion).
Page 412 5-2. Steps to take in an emergency NOTICE ■ To avoid damaging the transmission and other components ● Avoid spinning the wheels and do not rev the engine. ● If the vehicle remains stuck after trying these procedures, the vehicle may require towing to be freed.
Page 413 5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: STEP Steadily step on the brake pedal with both feet and firmly...
Page 414 5-2. Steps to take in an emergency CAUTION ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine.
Page 415 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights 171.9 in. (4365 mm) Overall length 173.0 in. (4395 mm) Overall width 69.5 in. (1765 mm) 61.0 in. (1550 mm) Overall height 61.4 in. (1560 mm) Wheelbase 102.4 in. (2600 mm) Front 59.8 in.
Page 416 Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
Page 417 6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown. 1.8 L 4-cylinder (2ZR-FE) engine 2.4 L 4-cylinder (2AZ-FE) engine...
Page 418 6-1. Specifications Engine 1.8 L 4-cylinder (2ZR-FE) engine Model 2ZR-FE engine 4 cylinder in line, Type 4 cycle, gasoline 3.17 × 3.48 in. Bore and stroke (80.5 × 88.3 mm) Displacement 109.7 cu.in. (1798 cm Drive belt tension 143 ± 22 lbf (650 ± 100 N, 65 ± 10 kgf) Valve clearance (engine cold) Intake Automatic adjustment...
Page 419 6-1. Specifications 2.4 L 4-cylinder (2AZ-FE) engine Model 2AZ-FE engine 4 cylinder in line, Type 4 cycle, gasoline 3.48 × 3.78 in. Bore and stroke (88.5 × 96.0 mm) Displacement 144.1 cu.in. (2362 cm Drive belt tension Automatic adjustment Valve clearance (engine cold) 0.007 ⎯...
Page 420 3.8 qt. (3.6 L, 3.2 Imp. qt.) ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC multigrade engine oil Recommended viscosity: 1.8 L 4-cylinder (2ZR-FE) engine...
Page 421 6-1. Specifications Oil viscosity (0W-20 is explained here as an example): ● The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. ●...
Page 422 (Reference) 2.4 L 4-cylinder (2AZ-FE) engine 6.0 qt. (5.7 L, 5.0 Imp. qt.) Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based non-silicate, Coolant type non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology...
Page 423 6-1. Specifications Ignition system Spark plug Make 1.8 L 4-cylinder (2ZR-FE) engine DENSO SC20HR11 2.4 L 4-cylinder (2AZ-FE) engine DENSO SK20R11 DENSO SK16R11 NGK IFR6A11 NGK IFR5A11 0.043 in. (1.1 mm) NOTICE ■ Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust spark plug gap. Electrical system Battery 12.6 ⎯...
Page 424 Please be aware that depending on the particular characteristics of the gear oil used or the operating conditions, idle sound, shift feeling and/or fuel effi- ciency may be different or affected. Toyota recommends to use “TOYOTA Genuine Manual Transmission Gear Oil LV” to achieve optimal performance.
Page 425 Toyota Genuine ATF WS NOTICE ■ Automatic transmission fluid type Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the transmission of your vehicle.
Page 426 6-1. Specifications Rear differential (AWD models) Oil capacity 0.5 qt. (0.5 L, 0.4 Imp. qt.) Oil type Hypoid gear oil API GL-5 Above 0°F (-18°C): SAE 90 Recommended oil viscosity Below 0°F (-18°C): SAE 80W or 80W-90 Transfer (AWD models) Oil capacity 0.8 qt.
Page 427 6-1. Specifications Brakes 1.8 L 4-cylinder (2ZR-FE) engine 3.4 in. (87 mm) 2.4 L 4-cylinder (2AZ-FE) engine • AWD models: 3.4 in. (87 mm) Pedal clearance • 2WD models with P215/45R18 tires: 3.4 in. (87 mm) • 2WD models with tires other than the above: 3.3 in.
Page 428 6-1. Specifications Steering Free play Less than 1.2 in. (30 mm) Tires and wheels 16-inch tires P205/55R16 89H, T135/80R16 101M or Tire size T135/70R17 102M 2WD models Front: 32 psi (220 kPa, 2.2 kgf/cm bar) Rear: 32 psi (220 kPa, 2.2 kgf/cm bar) Spare: 60 psi (420 kPa, 4.2 kgf/cm Tire inflation pressure...
Page 429 6-1. Specifications 17-inch tires P215/45R17 87W, T135/80R16 101M or Tire size T135/70R17 102M 2WD models Front: 32 psi (220 kPa, 2.2 kgf/cm bar) Rear: 32 psi (220 kPa, 2.2 kgf/cm bar) Spare: 60 psi (420 kPa, 4.2 kgf/cm Tire inflation pressure bar) (Recommended cold tire AWD models...
Page 430 6-1. Specifications Light bulbs Light Bulbs Bulb No. Type Headlights Low beam 9006 High beam 9005 Front turn signal/park- ing and front side 3457NA 27/7 marker lights Front fog lights (if ⎯ Exterior equipped) ⎯ Rear turn signal lights Stop/tail and rear side 7443 21/5 marker lights...
Page 431 ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada. ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. ■...
Page 432 10% ethanol). (85% ethanol) ● If you use gasohol in your Toyota, be sure that it has an octane rating no lower than 87. ● Toyota does not recommend the use of gasoline containing methanol.
Page 433 6-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s catalytic converters causing the emission control system to malfunction.
Page 434 6-1. Specifications Tire information Typical tire symbols Full-size tire Compact spare tire Tire size (→P. 460) DOT and Tire Identification Number (TIN) (→P. 459) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location of treadwear indicators (→P.
Page 435 6-1. Specifications Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL”...
Page 436 6-1. Specifications Typical DOT and Tire Identification Number (TIN) DOT symbol Tire Identification Number (TIN) Tire manufacturer's identifica- tion mark Tire size code Manufacturer's optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Federal...
Page 437 6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 or 3 digits) Speed symbol...
Page 438 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
Page 439 6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speci- fied government test course. For example, a tire graded 150 would wear one and a half (1-1/2) times as well on the government course as a tire graded 100.
Page 440 6-1. Specifications Warning: The temperature grades for this tire are established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sepa- rately or in combination, can cause heat buildup and possible tire fail- ure.
Page 441 6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as speci- Occupant distribution fied in the third column of Table 1 below The combined weight of installed regular pro- duction options weighing over 5 lb.
Page 442 6-1. Specifications Tire related term Meaning The surface area of the rim not covered by the Weather side inflated tire The part of the tire that is made of steel wires, Bead wrapped or reinforced by ply cords and that is shaped to fit the rim A breakdown of the bond between components Bead separation...
Page 443 6-1. Specifications Tire related term Meaning The parting of the innerliner from cord material Innerliner separation in the carcass (a) The sidewall that contains a whitewall, bears white lettering, or bears manufac- turer, brand, and/or model name molding that is higher or deeper than the same Intended outboard molding on the other sidewall of the tire, or sidewall...
Page 444 6-1. Specifications Tire related term Meaning A layer of rubber-coated parallel cords A parting of rubber compound between adja- Ply separation cent plies A mechanical device made of rubber, chemi- cals, fabric and steel or other materials, that, Pneumatic tire when mounted on an automotive wheel, pro- vides the traction and contains the gas or fluid that sustains the load...
Page 445 6-1. Specifications Tire related term Meaning That portion of a tire that comes into contact Tread with the road A tread section running circumferentially Tread rib around a tire Tread separation Pulling away of the tread from the tire carcass The projections within the principal grooves Treadwear indicators designed to give a visual indication of the...
Page 446 Your vehicle includes a variety of electronic features that can be per- sonalized to your preferences. Programming these preferences requires specialized equipment and may be performed by your Toyota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer. Customized Item Function Default setting...
Page 447 6-2. Customization Customized Item Function Default setting setting Driver's door unlocked in one All doors Unlocking using a key step, all doors unlocked in one unlocked in two step steps Opening driver's door Door lock unlocks all doors (vehicles with power Shifting gears to P door lock unlocks all doors.
Page 448 6-3. Initialization Items to initialize The following items must be initialized for normal system operation in cases such as after maintenance is performed on the vehicle. Item When to initialize Reference Maintenance data After the maintenance is performed P. 321 (U.S.A.
Page 449 6-3. Initialization...
Page 450 If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 451 Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité...
Page 452 Guide confort de ceinture de sécurité (sièges arrière latéraux) Si la sangle diagonale est proche du cou d’une personne, utilisez le guide confort de la ceinture de sécurité. Sortez le guide confort de la ÉTAPE pochette. Glissez la ceinture dans la fente ÉTAPE du guide.
Page 453 ■ Ceinture de sécurité latérale arrière Si la ceinture de sécurité est sortie de son guide, repassez-la dedans avant de l'utiliser. Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eau savonneuse tiède. Vérifiez régulièrement que les ceintures ne sont pas effilochées, entaillées ou exagérément usées.
Page 454 SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instructions in English. Airbags frontaux Airbag conducteur et passager avant Participent à...
Page 455 Composition du système d’airbags Capteurs d’airbag avant Témoin d'alerte SRS Système de classification Contacteur de boucle de l'occupant siège ceinture sécurité passager avant (ECU et passager avant capteurs) Boîtier électronique Capteurs de porte d’airbags Airbag passager avant Capteurs airbags rideau Airbags latéraux Airbag conducteur Prétensionneurs...
Page 456 Votre véhicule est équipé de ADVANCED AIRBAGS conçus selon les normes de sécurité américaines applicables aux véhicules à moteur (FMVSS208). Le boîtier électronique (ECU) des sacs de sécurité gonflables régule le déploiement de ces derniers sur la base des informations qu'il reçoit des capteurs, etc. indiqués ci-dessus dans le schéma illustrant les composants du système.
Page 457 ATTENTION ■ Précautions avec les airbags SRS Respectez les précautions suivantes concernant les airbags. Autrement, des blessures graves, voire mortelles, pourraient s'ensuivre. ● Le conducteur et tous les passagers à bord du véhicule doivent porter leur ceinture de sécurité correctement. Les airbags SRS sont des dispositifs de protection complémentaires aux ceintures de sécurité.
Page 458 ATTENTION ■ Précautions avec les airbags SRS ● Si vous attachez une rallonge de ceinture de sécurité aux boucles de ceinture de sécurité avant, mais pas au pêne de la ceinture de sécurité, les airbags SRS frontaux détectent que le conducteur et le passager avant ont attaché...
Page 459 être grièvement blessés ou tués par le déploiement d'un airbag. Installez dans un siège de sécurité enfant les enfants trop jeunes pour pouvoir utiliser la ceinture de sécurité. Toyota recommande vivement que les nourrissons et les jeunes enfants soient installés sur le siège arrière du véhicule et convenablement attachés.
Page 460 ATTENTION ■ Précautions avec les airbags SRS ● Ne laissez pas un enfant rester debout devant l’airbag SRS passager avant ou bien s'asseoir sur les genoux du passager avant. ● Ne conduisez pas le véhicule lorsque le conducteur ou le passager avant a quelque chose de posé...
Page 461 ATTENTION ■ Précautions avec les airbags SRS ●Ne rien fixer aux portes, à la vitre du pare-brise, aux vitres latérales, aux montants avant et arrière, au rail latéral de toit et à la poignée de maintien. ●Ne suspendez crochets à vêtements aucun cintre nu ni aucun objet dur.
Page 462 Toyota. ■ Modification et mise au rebut des éléments du système d’airbags SRS Consultez impérativement votre concessionnaire Toyota si vous avez besoin d'intervenir sur votre véhicule ou de procéder à l'une des modifications suivantes.
Page 463 Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING 2 Wheel Drive 4 Wheel Drive Air Conditioning Anti-lock Brake System Accessory Automatic Locking Retractor All Wheel Drive Child Restraint System Electronic Control Unit Event Data Recorder Emergency Locking Retractor Electric Power Steering GAWR Gross Axle Weight Rating GCWR Gross Combination Weight Rating...
Page 464 Abbreviation list ABBREVIATIONS MEANING Vehicle Identification Number Vehicle Stability Control...
Page 465 What to do if... What to do if... If you have a flat tire A tire punctures P. 408 P. 422 If the engine will not start The engine does not start P. 68 Engine immobilizer system P. 425 If the battery is discharged If the shift lever cannot be shifted The shift lever cannot be P.
Page 466: Warning Lights
What to do if... ■Warning lights Brake system warning Active Torque Control 4WD sys- light tem warning light P. 398 Maintenance required reminder light P. 397 P. 400 Charging system warn- Tire pressure warning ing light light P. 398 P. 400 Low engine oil pressure Low windshield washer fluid level warning light...
Page 467: Gas Station Information
GAS STATION INFORMATION Auxiliary catch lever Fuel filler door P. 330 P. 64 Hood lock release lever Fuel filler door opener Tire inflation pressure P. 330 P. 64 P. 451 Fuel tank capacity 13.2 gal. (50 L, 10.9 Imp. gal.) (Reference) Fuel type Unleaded gasoline only...

Toyota 2013 Matrix Manual

Quick Links

Related Manuals for Toyota 2013 Matrix

Summary of Contents for Toyota 2013 Matrix

Table of Contents