Toyota 1999 Sienna Owner's Manual page 96

—Top strap anchors and
locations
If your child restraint system requires
the use of a top strap, latch the hook
onto the anchor bracket and tighten the
top strap.
See the following instructions to install the
anchor bracket.
96
Bolt Anchor
bracket
Spacer
361 mm
396 mm
(14.2 in.)
(15.6 in.)
Center line
Second seat left side only (bench seat)
396 mm
Bolt
(15.6 in.)
Anchor
bracket
Spacer
361 mm
(14.2 in.) Center line
Second seat left side only (captain seat)
name. SIENNA (45403U)
308 mm
(12.1 in.)
Anchor
bracket
Spacer
543 mm
(21.4 in.)
Center line
Third seat
On the floor behind the rear seat
a. Using the illustration as a guide, find
the slits on the floor carpet to locate the
position of the holes underneath.
b. Make a hole in the covering directly
above the hole in the floor.
c. Insert a 15 mm (0.6 in.) spacer and
tighten down the anchor bracket for your
child restraint system with a bolt. Torque
the bolt to 16.5—24.7 N⋅m (1.68—2.52
kgf⋅m, 12.2—18.2 ft⋅lbf).
Bolt