Honda 1990 Accord Sedan Owner's Manual page 29

Lights
Turn Signals
Push the turn signal lever down
to signal a left turn, and up for
a right turn. The indicator and
appropriate signal lights will
blink. The lever
automatically
position when
wheel is returned to straight
ahead.
For lane changing you can
signal by pushing the lever
part way up or down (to the first stop) and holding it there; the
lever will return to its original position when you release it.
If either turn signal indicator lights up but does not blink, blinks
faster than usual or does not light up at all, check for a burned
out bulb or fuse.
Headlights
Turn the light switch to the
first position ( ) for taillights,
side marker
lights, and instrument panel
lights. Turn to the second posi-
tion ( ) to illuminate the head-
lights.
If the driver's door is opened when the light switch is turned to
either " o n " position, a chime will sound to remind you to turn
off your lights.
High Beam/Low Beam Switch
The headlights may be switch-
ed between low beam and high
beam by pulling the turn signal
lever towards you. The blue
high beam indicator light will
be on when the high beam is
on.
Headlight Flasher
To use the headlights as a passing signal, pull lightly on the
turn signal lever and release.
will return
to its original
the steering
lights, parking
RIGHT TURN
FIRST
STOP
FIRST
STOP
LEFT TURN
FIRST POSITION
Turn
SECOND POSITION
Pull and release