Toyota 1997 Corolla Owner's Manual page 51

S If the seat belt does not function
normally, it cannot protect your
child from injury. Contact your Toy-
ota dealer immediately. Do not use
the built−in child restraint until the
seat belt is fixed.
46
6. Fasten the shoulder belt clip.
The purpose of the clip is to keep the
shoulder belts positioned correctly on the
shoulders.
CAUTION
!
An unfastened shoulder belt clip
will not keep the belts on the child's
shoulders. In a sudden stop or
crash, the child may go too far for-
ward and be seriously injured. Make
sure the belt clip is fastened at all
ti
7. Pull the seat belt adjustment strap
(gray tab) firmly until the shoulder
belts are snugly adjusted around
the child's shoulders.
You should not be able to put more than
two fingers between a shoulder belt and
the child's chest.
After adjusting the shoulder belt tight-
ness, move the shoulder belt clip 5 to 8 cm
(2 to 3 in.) below the child's chin. On each
belt, the shoulder part should be centered
on the child's shoulder. The belts should
be away from the child's face and neck,
but not falling off the child's shoulders.