Plus - Mercedes-Benz 2013 CLA Owner's Manual

the braking force to a level suitable for the
traffic conditions.
X
Keep the brake pedal depressed until the
emergency braking situation is over.
ABS prevents the wheels from locking.
The brakes will work normally again if:
you release the brake pedal
R
there is no longer any danger of a collision
R
no obstacle is detected in front of your
R
vehicle
Adaptive Brake Assist is then deactivated.
Vehicles with PRE-SAFE
Assist requires particularly high brake pres-
sure, preventive passenger protection meas-
®
ures (PRE-SAFE ) are deployed simultane-
ously.
Up to vehicle speeds of around 250 km/h,
adaptive Brake Assist is capable of reacting
to moving objects that have already been rec-
ognised as such at least once over the period
of observation. Adaptive Brake Assist does
not react to stationary obstacles.
If adaptive Brake Assist is not available due
to a malfunction in the radar sensor system,
the brake system remains available with full
brake boosting effect and BAS.
In particular, the detection of obstacles can
be impaired if there is:
dirt on the sensors or the sensors are
R
obscured
snow or heavy rain
R
interference by other radar sources
R
strong radar reflections, for example, in
R
multi-storey car parks
a narrow vehicle travelling in front, e.g. a
R
motorcycle
a vehicle travelling in front on a different
R
line
Following damage to the front end of the vehi-
cle, have the configuration and operation of
the radar sensor checked at a qualified spe-
cialist workshop. This also applies to colli-
sions at slow speeds where there is no visible
damage to the front of the vehicle.
®
: if adaptive Brake
Driving safety systems
COLLISION PREVENTION ASSIST PLUS
General notes
COLLISION PREVENTION ASSIST PLUS is
only available on vehicles with DISTRONIC.
COLLISION PREVENTION ASSIST PLUS
extends the functionality of COLLISION PRE-
VENTION ASSIST with an automatic braking
function. COLLISION PREVENTION ASSIST
PLUS can help you to minimise the risk of a
front-end collision with a vehicle ahead or
reduce the effects of such a collision. If COL-
LISION PREVENTION ASSIST PLUS detects
that there is a risk of a collision, you will be
warned visually and acoustically. In critical
situations COLLISION PREVENTION ASSIST
PLUS also initiates automatic braking.
Function
X
To activate/deactivate: activate or deac-
tivate COLLISION PREVENTION ASSIST
PLUS in the on-board computer
( Y page 218).
If COLLISION PREVENTION ASSIST PLUS is
deactivated, the æ symbol appears in the
assistance graphics display.
If the driver's seat belt is fastened, COLLI-
SION PREVENTION ASSIST PLUS can brake
automatically within a speed range of
between 7 km/h and 200 km/h.
COLLISION PREVENTION ASSIST PLUS can
also react to stationary obstacles with auto-
matic braking within a speed range of
between 7 km/h and 30 km/h.
Vehicles with PRE-SAFE
braking function of COLLISION PREVENTION
ASSIST PLUS intervenes powerfully, preven-
tive passenger protection measures (PRE-
®
SAFE ) are deployed simultaneously.
In particular, the detection of obstacles can
be impaired in the case of:
dirt on the sensors or the sensors are
R
obscured
snow or heavy rain
R
interference by other radar sources
R
®
: if the automatic
Z
67