Advertisement
Are your rooms too warm/too cold?
+
–
Press + or
to increase or decrease the
room temperature setpoint in increments of
–
0.5 °C/1 °F. Proceed as follows:
Ok
+
–
•
Press
or
Set
temporarily.
This readjustment is reset as soon as
Mode
the operating mode changes
•
Press Ok, Set or Mode to save the
setting or wait for the program to exit
automatically
•
To lock the setpoints, use parameters
P06 and P08
Do you want to change the operating
mode?
The thermostat provides Comfort, Economy
Mode
and automatic mode. Changeover between
the operating modes can be made manually
by pressing Mode.
Comfort mode is the permanent (24 h)
selection of Comfort. Select this operating
mode to maintain Comfort temperature
permanently without any time switch. It is
used during occupancy periods, for
example.
Economy mode is the permanent (24 h)
selection of Economy. Select this operating
mode to maintain the Economy temperature
permanently without any time switch.
It is used during non-occupancy periods
(e.g. at night).
In Auto Timer mode, the operating
AUTO
modes (Comfort, Economy) are changed
automatically according to the time switch
setting.
!
Note:
Frost protection is a function always active
in the background. As soon as the room
temperature falls below 5 ºC, the unit
automatically activates heating
Do you want to set permanent temperature
setpoints?
Set
•
Press Set and select
Ok
•
Press Ok to confirm
+
•
Press Mode to select the operating
mode (Comfort or Economy)
–
+
–
•
Press
or
Mode
permanently
•
Press Ok to confirm
•
Press Mode to exit or wait for a timeout
to exit automatically
!
Note:
This permanent setpoint is used during Auto
Timer mode.
Energy saving tips without loss of
comfort
•
Select Auto Timer mode for the heating period, and
set the time switch according to your normal habits at
home
•
Select Economy or Holiday mode for longer periods
of non-occupancy and the summer period
2/4
Operating Instructions
to change the setpoint
.
to adjust the setpoint
CB1B1432en_01 / 2013-07-05
Do you want to set your Holiday mode?
Use the Holiday mode to set the thermostat
Set
to a constant room temperature while
Ok
absent.
+
•
Press Set and select
–
•
Press Ok to confirm
Mode
+
–
•
Press
or
setpoint
•
Press Ok to confirm
+
–
•
Press
or
for holidays (0 = Holiday mode Off)
•
Press Ok to save the setting
•
When Holiday mode is activated, the
remaining days are displayed
!
Note:
If you press Mode while Holiday mode is active, the
function is deactivated and symbol
If the Comfort and Economy setpoints are both
locked, the lowest locked setpoint is the Holiday
mode setpoint. You can adjust the setpoint from 5 ºC
up to the lowest locked setpoint
Do you want to enter your own time switch?
Option 1: Time switch with individual day settings
(P11=0)
You can select Comfort or Economy mode
Set
in steps of 15 minutes throughout the day.
Ok
The 0:00 to 24:00 hour time bar allows you
+
to set the operating mode for the selected
day(s).
–
Example:
Mode
1
0
6
Visible bars: Control to Comfort
temperature
Invisible bars: Control to Economy
temperature
When Auto Timer mode is enabled,
changeover between the operating modes is
automatic after the settings are saved.
Proceed as follows:
1) Press Set and select
2) Press Ok to confirm.
3) Time switch for Mon (1) is displayed.
+
–
4) Press
or
to select the weekday, from
Mon(1) to Sun(7).
5) Press Ok to confirm the selection and
initiate time programming.
During programming:
6) Press Mode to select the operating mode
(Comfort or Economy) or
+
–
7) Press
or
to set the time in steps of
15 minutes for the selected mode.
8) Press Ok to save the time switch.
9) Repeat steps 4-8 for all remaining days (if
required) or
10) Press Mode or wait for the program to
exit automatically.
Siemens Building Technologies
to adjust the temperature
to set the number of days
disappears.
.
2
1 8
1 2
2 4
.
AUTO
Advertisement
