Linking And Unlinking The Remote Keyless Entry Transmitter To Memory; Memory Position Recall - Chrysler 2012 300 Owner's Manual

• The Recall Memory with Remote Key Unlock feature
can be enabled through the Uconnect Touch™ System,
refer to "Uconnect Touch™ Settings" in "Understand-
ing Your Instrument Panel" for further information.
Linking And Unlinking The Remote Keyless Entry
Transmitter To Memory
Your RKE transmitters can be programmed to recall one
of two pre-programmed memory profiles by pressing the
UNLOCK button on the RKE transmitter.
To program your RKE transmitters, perform the follow-
ing:
1. Remove the Key Fob from the ignition (or change the
ignition to OFF, for vehicles equipped with Keyless
Enter-N-Go).
2. Select desired memory profile (1) or (2).
3. Once the profile has been recalled, press and release
the SET (S) button on the memory switch, then press and
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171
release button (1) or (2) accordingly. "Memory Profile
Set" (1 or 2) will display in the instrument cluster on
vehicles equipped with the EVIC.
4. Press and release the LOCK button on the RKE
transmitter within 10 seconds.
NOTE: Your RKE transmitters can be unlinked to your
memory settings by pressing the SET (S) button followed
by the UNLOCK button on the RKE transmitter in Step 4
above.

Memory Position Recall

NOTE: The vehicle must be in PARK to recall memory
positions. If a recall is attempted when the vehicle is not in
PARK, a message will display in the EVIC (if equipped).
To recall the memory settings for driver one, press
MEMORY button number (1) on the driver's door or the
UNLOCK button on the RKE transmitter linked to
memory position 1.
3